GDP Solid Carbide Bits

A good choice for machining wood based products that are not prone to chipping on the top edge.  Suitable for face-down machining single side coate...

A good choice for machining panel products, that are not prone to chipping on the top edge (i.e. not recommended for laminated panels), at higher f...

Solid Carbide Straight Flute Router Bit featuring a carbide grade that is suitable for cutting wood, composites, and a variety of plastic materials...

As the name implies, a rougher bit is designed for a rough cut with fairly fast feed rates. Not recommended for a finish cut. Tools shown are RH ro...

This solid carbide down cut finishing tool is recommended when faster feed rates are used for a finishing cut. The down shear effect provides a cle...

This solid carbide down cut finishing tool is a popular choice due to its special carbide grade for long life on melamine. The down shear effect pr...

3-Flute Solid Carbide Compression Spiral Router Bit with a carbide grade best suited for machining wood. Also recommended when various materials ar...

3-Flute Solid Carbide Compression Spiral Router Bit with a carbide grade best suited for machining melamine.Recommended Feed Rate: 750″/minute and ...

Solid Carbide Compression Spiral Router Bit. Our long-life version features a carbide grade that is designed for composite materials and provides a...

A compression style chipbreaker is the best option for machining plywood as it gets chips broken down and out of the cut more rapidly. This reduces...

Solid Carbide Compression Spiral Router Bit featuring a carbide grade that is suitable for cutting wood. Also suitable when small quantities of var...

2-Flute Solid Carbide Compression Spiral Router Bit featuring a special carbide grade that is most suitable for cutting melamine. The compression s...

Solid Carbide Compression Spiral Router Bit. This tool features a carbide grade that provides best performance on wood composite materials such as ...

As the name implies, a chipbreaker bit is designed to better reduce chip size, particularly when machining plywood, OSB and similarly structured ma...

As the name implies, a chipbreaker bit is designed to better reduce chip size, particularly when machining plywood to facilitate easy chip evacuati...

A compression style chipbreaker is the best option for machining plywood as it gets chips broken down and out of the cut more rapidly. This reduces...

For flexible plastics, with upward shear to assist with chip removal.Other sizes, diameters, flute count and cutting lengths are available on request.

Straight Solid Carbide O-Flute Bit for Flexible Plastics  (Polycarbonate, ABS, Polystyrene, PVC etc).  Single Flute.Other sizes, diameters, flute c...

Solid Carbide 3-Flute Finishing Cutter with special tool geometry for best surface finish. A polished flute as well as polished clearance angles in...

Single flute solid carbide router bits made of either standard or micro grain carbide with special cutting edge geometry for the best surface quali...

Single flute solid carbide router bits made of either standard or micro grain carbide with special cutting edge geometry for the best surface quali...

Recommended machining parameters:Precut (roughing) – conventional cut: 16-24,000 rpm 2-6m/min feed rateFinish Cut – climb cut 16-24,000 rpm, .3-.6m...

Solid Carbide Ballnose bit suitable for carving, fluting and shallow concave radius cuts. Ballnose bits are also used when planing uneven surfaces ...