GDP Tooling

Solid Carbide Ballnose bit suitable for carving, fluting and shallow concave radius cuts. Ballnose bits are also used when planing uneven surfaces ...

Solid Carbide Compression Spiral Router Bit. This tool features a carbide grade that provides best performance on wood composite materials such as ...

2-Flute Solid Carbide Compression Spiral Router Bit featuring a special carbide grade that is most suitable for cutting melamine. The compression s...

Solid Carbide Compression Spiral Router Bit featuring a carbide grade that is suitable for cutting wood. Also suitable when small quantities of var...

A compression style chipbreaker is the best option for machining plywood as it gets chips broken down and out of the cut more rapidly. This reduces...

A compression style chipbreaker is the best option for machining plywood as it gets chips broken down and out of the cut more rapidly. This reduces...

This solid carbide down cut finishing tool is a popular choice due to its special carbide grade for long life on melamine. The down shear effect pr...

A good choice for machining wood based products that are not prone to chipping on the top edge.  Suitable for face-down machining single side coate...

Solid Carbide Compression Spiral Router Bit. Our long-life version features a carbide grade that is designed for composite materials and provides a...

3-Flute Solid Carbide Compression Spiral Router Bit with a carbide grade best suited for machining melamine.Recommended Feed Rate: 750″/minute and ...

3-Flute Solid Carbide Compression Spiral Router Bit with a carbide grade best suited for machining wood. Also recommended when various materials ar...

This solid carbide down cut finishing tool is recommended when faster feed rates are used for a finishing cut. The down shear effect provides a cle...

As the name implies, a rougher bit is designed for a rough cut with fairly fast feed rates. Not recommended for a finish cut. Tools shown are RH ro...

A good choice for machining panel products, that are not prone to chipping on the top edge (i.e. not recommended for laminated panels), at higher f...

Series 4322For producing 45 degree bevel cuts in solid wood or composite materials. This tool features 2 reversible standard solid carbide insert k...

As the name implies, a chipbreaker bit is designed to better reduce chip size, particularly when machining plywood to facilitate easy chip evacuati...

As the name implies, a chipbreaker bit is designed to better reduce chip size, particularly when machining plywood, OSB and similarly structured ma...

Series 6365Hardened, ground and precision balanced, this tool holder accepts ER16 collets (available up to 10mm diameter) and is designed for use w...

Series 6243With two solid carbide insert tips shearing downward and 2 inserts shearing upward the 6243 series provides a chip free surface finish o...

ONE, TWO & THREE FLUTE PCD BITSOur single and 2 flute PCD bits are all designed for nesting cuts with a short upshear. Upper Cutting edges shea...

Series 4524This Series 4524 corrugated head tool holder features a steel body design and offers a great option for short production runs and proto-...

Ceramic Coated Dust Extractor collet nut replaces the standard nut on a tool holder and provides significant assistance with dust evacuation out of...

Series 6236Insert tool for routing deep mortise pockets in composite and solid wood. This tool is primarily used for lock pocket cutouts. Tool body...

Carbide tipped brad point bit to drill blind holes for dowel and shelf pins in cabinet and closet construction. The shank features a height adjustm...