Products

85mm Diameter outer safety flange for sawblade holder. Comes with mounting hardware. Complete sawblade holder shown for illustration purposes only.

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 100mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hard...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 1200mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting har...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 40mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 50mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 50mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

High-precision HSK tool holder with thermal shrinking technology for shank tolerance as per norm EN 847-2. Finely balanced up to 30 000 R.P.M. Shor...

This easy to mount tightening fixture is specifically designed for the HSD ISO 30 toolholders with the "Biesse" flats. Made out of solid aluminum w...

ISO15 ERSW11 Toolholder fitted with ER11 Hex Nut and ISO15 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-7mm tool sizes.

ISO15 ERM11 Toolholder fitted with ER11 Mini Nut and ISO15 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-7mm tool sizes.

ISO20 ER16 Toolholder fitted with ER16 Mini Nut. A=51, Balanced to 40,000rpm @G2.5

ISO20 ER16 Toolholder fitted with ER16 Mini Nut. A=51, Balanced to 40,000rpm @G2.5 For use with ELTE spindles only

ISO20 ER20 Toolholder fitted with ER20 Mini Nut. Balanced to 40,000rpm @G2.5. Fits 1-13mm tool sizes.

ISO20 ER20 Toolholder fitted with ER20 Mini Nut and Colombo ISO20 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-13mm tool sizes.

ISO30 Drill Chuck 1- 13mm (1/2") shank capacity, A=107mm, includes key. Balanced to 24,000rpm @ G2.5 One piece design for optimal rigidity and safe...

ISO/BT30 ER32 Toolholder for Thermwood CNC Router with HSD spindle motor, A=55mm. Balanced to 24,000 rpm @ G2.5, includes HSD pullstud and ER32 col...

ISO30 ER32 Toolholder, A=50mm. Commonly used on many ISO30 HSD Electrospindle equipped CNC routers. Balanced to 24,000 rpm @ G2.5, includes HSD pul...

ISO30 ER32 Toolholder, A=50mm LH Threaded Nut. Commonly used on many ISO30 HSD Electrospindle equipped CNC routers. Balanced to 24,000 rpm @ G2.5, ...

SK30 ER32 Toolholder, A=63mm. Left-Hand Threaded Nut - Commonly known as ISO30 for many HSD/Colombo equipped CNC routers. Balanced to 24,000 rpm @ ...

ISO30 ER32 Toolholder, A=70mm. Commonly used on many ISO30 HSD Electrospindle equipped CNC routers. Balanced to 24,000 rpm @ G2.5, includes HSD pul...

ISO30 ER32 Toolholder, A=58mm for CMS CNC Router (46mm flange diameter). Balanced to 24,000 rpm @ G2.5, includes CMS pullstud and ER32 collet nut.

ISO/BT30 OZ25/RDO35 Toolholder for Thermwood CNC Router with HSD spindle motor, A=65mm. Balanced to 24,000 rpm @ G2.5, includes HSD pullstud and Co...

ISO/SK30 Spindle Taper Cleaner. A must to keep the spindle taper clean of debris for optimal toolholder contact.