{"product_id":"nutek-4000-c-line-6x-faster-plus","title":"OMAKSAN HOLEMASTER | 4000 C Line 6X Faster Plus","description":"\u003ch2\u003eConveyor Standard, Efficiency Maximum\u003c\/h2\u003e\n\n\u003cp\u003eThe Holemaster 4000 C Line 6X Faster Plus is the most automated machine in the Holemaster lineup. It combines the C Line architecture with an integrated outfeed conveyor as standard equipment, helping keep the production line moving without unnecessary operator handling.\u003c\/p\u003e\n\n\u003cp\u003eDual milling motors on both top and bottom enable simultaneous grooving and routing on both surfaces. The machine can finish all tasks in a single pass or process two workpieces at once, minimizing production time and operator handling.\u003c\/p\u003e\n\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003ch3\u003eMaximum Throughput: Conveyor Standard, Dual Milling Both Sides\u003c\/h3\u003e\n\n\u003cp\u003eThe 4000 C Line 6X Faster Plus takes the C Line architecture to its full expression. The integrated outfeed conveyor is no longer optional. It comes as standard equipment and is designed for continuous production where panels exit the drilling cell directly into the next operation without operator handling.\u003c\/p\u003e\n\n\u003cp\u003eThe conveyor pace matches the C Line's 140 m\/min feed rate, helping eliminate throughput bottlenecks at the machine exit.\u003c\/p\u003e\n\n\u003cp\u003eThe Plus also adds dual milling motors on both top and bottom, allowing grooving and routing operations to happen simultaneously on both surfaces of the panel. For shops where standard grooves run on both faces, such as drawer slides on the bottom or dado grooves on the top, this is a meaningful capability addition over the standard C Line.\u003c\/p\u003e\n\n\u003cp\u003eThe machine can finish all six-sided operations in a single pass or process two workpieces simultaneously, depending on the program. For high-volume cabinet manufacturers running continuous production, the C Line Plus is the most automated single-machine solution in the Holemaster lineup.\u003c\/p\u003e\n\n\u003ch2\u003eThe 4000 C Line 6X Faster Plus is Right For You If…\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYou are running continuous high-volume production at scale\u003c\/li\u003e\n  \u003cli\u003eYou need an integrated outfeed conveyor for downstream operations\u003c\/li\u003e\n  \u003cli\u003eYour production includes grooving or routing on both top and bottom surfaces\u003c\/li\u003e\n  \u003cli\u003eYou want the highest level of automation in a single-machine solution\u003c\/li\u003e\n  \u003cli\u003eYou are integrating the drilling cell into a fully automated production line\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Options\u003c\/h2\u003e\n\n\u003ch3\u003eStandard Equipment and Available Options\u003c\/h3\u003e\n\n\u003cp\u003eThe 4000 C Line 6X Faster Plus ships with an integrated outfeed conveyor as standard equipment, plus all C Line standards, including dual top drilling units, air-float tables, CNC clamps, dual milling motors, and barcode reader. Laser part length measurement is available as an optional upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eStandard Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOmaksan Works control software\u003c\/li\u003e\n  \u003cli\u003e2+1 drilling configuration with dual top drilling units and one bottom drilling unit\u003c\/li\u003e\n  \u003cli\u003eIntegrated outfeed conveyor as standard equipment\u003c\/li\u003e\n  \u003cli\u003eUpper unit: 18 vertical drilling spindles\u003c\/li\u003e\n  \u003cli\u003eHorizontal drilling: 16 spindles\u003c\/li\u003e\n  \u003cli\u003eLower unit: 9 vertical drilling spindles\u003c\/li\u003e\n  \u003cli\u003eDual milling motors for top and bottom operations, enabling simultaneous grooving on both surfaces\u003c\/li\u003e\n  \u003cli\u003eUpper milling unit: 4 kW\u003c\/li\u003e\n  \u003cli\u003eLower milling unit: 2.2 kW\u003c\/li\u003e\n  \u003cli\u003eFeed rate on X-axis: 140 m\/min\u003c\/li\u003e\n  \u003cli\u003eAir-float entry and exit tables for frictionless panel movement\u003c\/li\u003e\n  \u003cli\u003eCNC-controlled double clamp system for millimetric accuracy\u003c\/li\u003e\n  \u003cli\u003eIntegrated barcode reader compatible with leading design and ERP software\u003c\/li\u003e\n  \u003cli\u003eSingle-pass processing on all six sides or dual-workpiece processing\u003c\/li\u003e\n  \u003cli\u003eMilling length measurement\u003c\/li\u003e\n  \u003cli\u003eSafety mat with auto-stop and auto-resume\u003c\/li\u003e\n  \u003cli\u003eDust extraction: 2× 180 mm upper, 1× 100 mm lower\u003c\/li\u003e\n  \u003cli\u003eHardware compatibility: Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat\u003c\/li\u003e\n  \u003cli\u003eTotal installed power: 34 kW\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 7 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLaser part length measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetails\u003c\/th\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrill Block Configuration\u003c\/td\u003e\n      \u003ctd\u003e2+1 — dual top drilling units, single bottom drilling unit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eControl Program\u003c\/td\u003e\n      \u003ctd\u003eOmaksan Works\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanel Length\u003c\/td\u003e\n      \u003ctd\u003e80–4500 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanel Width\u003c\/td\u003e\n      \u003ctd\u003e40–1200 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanel Thickness\u003c\/td\u003e\n      \u003ctd\u003e8–45 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFeed Rate - X-axis\u003c\/td\u003e\n      \u003ctd\u003e140 m\/min\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNumber of Drilling Groups\u003c\/td\u003e\n      \u003ctd\u003e2+1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIntegrated Outfeed Conveyor\u003c\/td\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDual Milling Motors - Top and Bottom\u003c\/td\u003e\n      \u003ctd\u003eStandard — simultaneous grooving on both surfaces\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVertical Drills - Upper Group\u003c\/td\u003e\n      \u003ctd\u003e18\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVertical Drills - Lower Group\u003c\/td\u003e\n      \u003ctd\u003e9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHorizontal Drills\u003c\/td\u003e\n      \u003ctd\u003e16\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMilling Unit - Upper\u003c\/td\u003e\n      \u003ctd\u003e4 kW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMilling Unit - Lower\u003c\/td\u003e\n      \u003ctd\u003e2.2 kW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTotal Installed Power\u003c\/td\u003e\n      \u003ctd\u003e34 kW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWorking Pressure\u003c\/td\u003e\n      \u003ctd\u003e7 bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMachine Dimensions - L × W × H\u003c\/td\u003e\n      \u003ctd\u003e4840 × 2490 × 2100 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMachine Weight\u003c\/td\u003e\n      \u003ctd\u003e2200 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExtraction System\u003c\/td\u003e\n      \u003ctd\u003eAir-float table at entry and exit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp System\u003c\/td\u003e\n      \u003ctd\u003eCNC-controlled double clamp\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBarcode Reader\u003c\/td\u003e\n      \u003ctd\u003eStandard — compatible with leading design and ERP software\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMilling Length Measurement\u003c\/td\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLaser Part Length Measurement\u003c\/td\u003e\n      \u003ctd\u003eOptional\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDust Extraction Diameter\u003c\/td\u003e\n      \u003ctd\u003e2× 180 mm upper, 1× 100 mm lower\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSafety Mat\u003c\/td\u003e\n      \u003ctd\u003eStandard — auto-stop and auto-resume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware Compatibility\u003c\/td\u003e\n      \u003ctd\u003eMinifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplications\u003c\/td\u003e\n      \u003ctd\u003eKitchen cabinets, bathroom vanities, modular furniture, casework\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eManufactured in Bursa, Turkey\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Nutek","offers":[{"title":"Default Title","offer_id":52314429423898,"sku":null,"price":50000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/5217\/0010\/files\/omaksan-4000-c-line-6x-faster-plus.jpg?v=1780586022","url":"https:\/\/www.centexautomation.net\/products\/nutek-4000-c-line-6x-faster-plus","provider":"Centex Automation ","version":"1.0","type":"link"}