CE 25 25

All Star CNC CE 25 25 In-Board Gasketing — Frequently Asked Questions

1. What is CE 25 25 In-Board Gasketing?

CE 25 25 is an in-board vacuum gasket designed for CNC router spoilboards and fixture boards. It installs into routed vacuum channels to create a strong air-tight seal for improved part hold-down.

2. What do the numbers “25 25” represent?

The first “25” refers to a 1/4″ (0.250″) thickness, and the second “25” refers to a 1/4″ (0.250″) width, making this a square-profile gasket sized for 1/4″ routed channels.

3. How does CE 25 25 differ from CE 06 series gasketing?

The CE 25 25 has a thicker 1/4″ profile compared to the thinner 1/16″ height found in CE 06 models, providing greater compression and sealing strength for higher-demand vacuum systems.

4. When should I choose a 1/4″ thick gasket?

A 1/4″ thickness is typically selected when greater compression height is needed or when working with higher vacuum pressure systems requiring a more substantial seal.

5. What CNC machines is CE 25 25 compatible with?

It is compatible with CNC routers and vacuum tables that use 1/4″ routed grid channels.

6. What materials benefit from this gasket?

MDF, plywood, hardwood panels, plastics, aluminum composite materials, and other sheet goods benefit from improved vacuum hold and reduced part movement.

7. Is CE 25 25 adhesive-backed?

Yes. The gasket includes adhesive on one side for easy installation inside routed vacuum grooves.

8. Does the thicker profile improve hold strength?

Yes. The increased thickness provides greater compression and can improve sealing performance when properly matched to channel dimensions.

9. How long is each roll?

Standard rolls typically contain approximately 164 feet of gasket material.

10. Can this gasket be used in custom fixtures?

Yes. It is commonly used in dedicated vacuum fixtures that require consistent and repeatable sealing performance.

11. Does it improve machining accuracy?

Yes. Enhanced vacuum sealing reduces part vibration and movement during CNC cutting operations.

12. Can it reduce the need for mechanical clamps?

Yes. Improved vacuum hold often reduces or eliminates the need for mechanical hold-downs or tabs.

13. Is CE 25 25 suitable for nested-based CNC routers?

Yes. Nested-based routers benefit from stronger vacuum isolation, especially when processing smaller parts.

14. How do I determine if 1/4″ width is correct for my spoilboard?

Measure your routed channel width. The gasket should fit securely without excessive compression or loose gaps.

15. Is this gasket reusable?

Once installed, it remains in place until wear or compression fatigue reduces sealing performance, at which point replacement is recommended.

16. Are other thickness options available?

Yes. All Star CNC offers multiple thickness and width combinations to match various vacuum table designs and system pressures.

17. Is bulk purchasing available?

Yes. Case quantities are available for shops with higher gasket usage.

18. Does thicker gasket require more vacuum power?

Thicker gasket may require adequate vacuum pump capacity to achieve optimal compression and sealing performance.

19. Where can CE 25 25 be purchased?

CE 25 25 In-Board Gasketing is available for purchase online through Centex Automation at centexautomation.net.

20. Is product support available?

Centex Automation is an authorized online retail seller of All Star CNC products. We provide product selection guidance, ordering assistance, and customer support through our online store at centexautomation.net.