CE 06 38

All Star CNC CE 06 38 In-Board Gasketing — Frequently Asked Questions

1. What is CE 06 38 In-Board Gasketing?

CE 06 38 is a low-density in-board vacuum gasket designed for CNC router spoilboards and fixture boards. It installs inside routed vacuum channels to create an air-tight seal that improves hold-down strength.

2. What do the numbers “06 38” indicate?

“06” refers to a 1/16″ (0.062″) thickness, and “38” refers to a 3/8″ (0.375″) width, making this gasket suitable for wider vacuum channel grooves.

3. What is in-board gasketing used for?

In-board gasketing isolates vacuum zones within routed channels, helping convert a basic vacuum table into a more effective vacuum clamping system.

4. When should I use the 3/8″ width version?

The 3/8″ width is ideal for CNC tables with wider vacuum channels or systems requiring increased sealing surface area for stronger vacuum isolation.

5. What CNC machines is CE 06 38 compatible with?

It is compatible with CNC routers and vacuum tables that use routed grid systems for part hold-down.

6. What materials benefit from improved vacuum sealing?

MDF, plywood, hardwood panels, plastics, aluminum composite materials, and other sheet goods benefit from enhanced vacuum hold.

7. What does low-density gasket mean?

Low-density gasket compresses easily, making it suitable for lighter materials and moderate vacuum systems where extreme compression resistance is not required.

8. Is CE 06 38 adhesive-backed?

Yes. It includes adhesive on one side to simplify installation into routed vacuum grooves.

9. How long is each roll?

Each roll typically contains approximately 164 feet of gasket material.

10. Can this gasket be used in dedicated CNC fixtures?

Yes. It is commonly used in custom vacuum fixtures for repeatable, high-accuracy part positioning.

11. Does this improve cut accuracy?

Yes. By increasing vacuum isolation, it reduces part movement and helps maintain machining precision.

12. Can it reduce the need for mechanical clamps or tabs?

Yes. Improved vacuum performance often reduces or eliminates the need for tabs and mechanical hold-down devices.

13. Is CE 06 38 suitable for high-production shops?

Yes. In-board gasketing is widely used in production CNC environments to maximize hold-down reliability.

14. How do I determine if 3/8″ width is correct for my application?

Measure the width of your routed vacuum channels. The gasket should fit securely within the groove without excessive compression or loose gaps.

15. Is this gasket reusable?

Once installed, it remains in place until wear occurs. Replacement is only needed when the seal becomes compromised.

16. Are additional gasket sizes available?

Yes. All Star CNC offers multiple gasket widths and densities to accommodate different vacuum table designs.

17. Does wider gasket improve vacuum performance?

Wider gasket increases sealing surface area, which can enhance vacuum isolation on larger channel systems.

18. Is bulk purchasing available?

Yes. Case quantities are available for production shops with higher usage requirements.

19. Where can CE 06 38 be purchased?

CE 06 38 In-Board Gasketing is available for purchase online through Centex Automation at centexautomation.net.

20. Is product support available?

Centex Automation is an authorized online retail seller of All Star CNC products. We provide product selection guidance, ordering assistance, and customer support through our online store at centexautomation.net.