CE 06 12

All Star CNC CE 06 12 In-Board Gasketing — Frequently Asked Questions

1. What is CE 06 12 In-Board Gasketing?

CE 06 12 is a low-density in-board gasket material designed for CNC vacuum tables. It installs inside routed vacuum channels to create an air-tight seal and improve vacuum hold-down strength.

2. What do the numbers “06 12” represent?

“06” indicates 1/16″ (0.062″) thickness, and “12” indicates 1/8″ (0.125″) width, matching common CNC spoilboard channel dimensions.

3. What does “In-Board” mean?

In-Board gasketing is installed directly inside routed grooves on a spoilboard or fixture board to isolate vacuum zones and create stronger clamping pressure.

4. Why use vacuum gasketing instead of relying on down-draft alone?

Proper gasketing converts a basic vacuum table into an effective vacuum clamp by isolating air flow and increasing suction at the part location.

5. What CNC machines is CE 06 12 suitable for?

This gasket is suitable for CNC routers and vacuum tables that utilize routed channels for vacuum isolation.

6. What materials benefit from improved vacuum hold?

Wood, MDF, plywood, plastics, aluminum composite panels, and other non-porous sheet materials benefit from stronger vacuum sealing.

7. How does low-density gasketing perform?

Low-density gasket compresses easily and is often preferred for lighter materials, thinner sheets, or lower-powered vacuum systems.

8. Is the gasket adhesive-backed?

Yes. CE 06 12 includes adhesive on one side for simple installation inside routed channels.

9. How long is each roll?

Each roll contains approximately 164 feet of gasket material.

10. Can it be used in custom fixtures?

Yes. It is commonly used in dedicated CNC fixtures where repeatable part placement requires strong vacuum isolation.

11. Does it improve part stability?

Yes. Proper vacuum isolation reduces part movement, improving cut accuracy and reducing scrap.

12. Is this gasket reusable?

Once installed, it remains in place until wear occurs. Replacement is only necessary when the seal becomes compromised.

13. How do I know if this size is right for my table?

Select gasket width and thickness based on your routed channel dimensions and vacuum pump capacity.

14. Can this reduce the need for tabs?

Yes. Stronger vacuum isolation can reduce or eliminate the need for mechanical tabs in many CNC cutting applications.

15. Is it suitable for production environments?

Yes. In-board gasketing is widely used in both small shops and high-production CNC facilities.

16. Are other gasket sizes available?

Yes. All Star CNC offers multiple width and density options for different CNC vacuum table designs.

17. Does this help improve surface finish quality?

Yes. By preventing part shift during cutting, it helps maintain cleaner edges and reduces post-processing.

18. Is bulk purchasing available?

Yes. Case quantities are available for shops that consume high volumes of gasket material.

19. Where can this product be purchased?

CE 06 12 In-Board Gasketing is available for purchase online through Centex Automation at centexautomation.net.

20. Is product support available?

Centex Automation is an authorized online retail seller of All Star CNC products. We provide ordering assistance, product selection guidance, and customer support through our online store at centexautomation.net.