STANZA MACHINERY | STS 6 Head Linear Moulding Sprayer
Ideal for linear profiles in a wide range of materials. Multiple gun configurations allow for small custom production sizes to large quantity capabilities.
Stanza STS Linear Moulding sprayers are capable of utilizing both water and solvent based coatings including stains, paints, reactives, and lacquers. Our sprayers come equipped with spray guns that are automatically timed for the start and stop of the spray cycle to ensure best spray efficiency. The overspray is captured by 1-3 spray troughs and can be recovered, while atomized spray is captured by fiberglass media and clean air is exhausted out the spray cabin.
The STS series can be fitted with spray gun packages to suit your requirements, including:
- Conventional,
- Air-Assisted Airless
- Airless
STS Series Moulding Sprayers can be combined with a wide range of our sanders and drying ovens.
Specifications
| Work piece max. width | 12” |
| Work piece min. length | 36” |
| Feed Speeds | 30-150 FPM |
| Feed Motor | 1 hp |
| Extraction Fan | 3 hp |
| Number of Spray Guns | 6 |
| Recovery Troughs | 3 |
| Spray Gun Trigger | Electronic Switch |
| Filter Media | Replaceable fiberglass media |
| Voltage | 480V 3ph 60Hz |
| Total Amps | 10-20 amps |
Specifications
STANZA MACHINERY STS 6 Head Linear Moulding Sprayer FAQs
What parts suit STS?
Linear profiles in a range of materials.
Which coating bases are supported?
Water-based and solvent-based coatings.
Which finishes are listed?
Stains, paints, reactives and lacquers.
How many guns are specified?
Six.
What triggers spraying?
An electronic switch; start and stop are automatically timed.
Which gun packages are offered?
Conventional, air-assisted airless and airless.
What maximum width is listed?
12 inches.
What minimum length is listed?
36 inches.
What feed range is listed?
30–150 feet per minute.
How many recovery troughs are specified?
Up to three, depending on configuration; confirm the ordered arrangement.
What captures atomized spray?
Replaceable fiberglass media.
What feed motor is listed?
1 hp.
What extraction fan is listed?
3 hp.
What electrical supply is listed?
480 V, three-phase, 60 Hz; 10–20 amps listed.
Can it join a finishing line?
Stanza offers combinations with its sanders and drying ovens.
