STANZA MACHINERY | SSP 3 Head Linear Moulding Sprayer
Ideal for linear profiles in a wide range of materials.
The Stanza SSP series sprayers are ideal for linear profiles in a wide range of materials. They are capable of utilizing both water and solvent based coatings including stains, paints, and lacquers.
Spray guns are automatically timed for the start and stop of the spray cycle to ensure best spray efficiency. The overspray is captured by the spray trough and can be recovered while atomized spray is captured by fiberglass media and clean air is exhausted from the spray cabin.
The SSP series can be fitted with spray gun packages to suit your requirements, including:
- Conventional,
- Air-Assisted Airless
- Airless
SSP Series Moulding Sprayers can be combined with a wide range of our sanders and drying ovens.
Specifications
| Work Piece max. width | 12” |
| Work piece min. length | 30″ |
| Feed Speeds | 30-150+ FPM |
| Feed Motor | 1 hp |
| Extraction Fan | 3 hp |
| Number of Spray Guns | 3 |
| Recovery Troughs | 1 |
| Spray Gun Trigger | Photocell |
| Filter Media | Replaceable fiberglass media |
| Voltage | 480V, 3ph, 60Hz |
Accessories
- Optional spray gun packages in airless, air-assisted airless, and conventional.
- Teflon coatings
- Spray booth coatings
- Stainless steel interiors/filter housings
- High pressure fluid systems
- Low pressure conventional setups
Specifications
STANZA MACHINERY SSP 3 Head Linear Moulding Sprayer FAQs
What parts suit SSP?
Linear profiles in a range of materials.
Which coating bases are supported?
Water-based and solvent-based coatings.
Which finishes are mentioned?
Stains, paints and lacquers.
How many guns are specified?
Three.
What triggers spraying?
A photocell; spray start and stop are automatically timed.
Which gun packages are offered?
Conventional, air-assisted airless and airless.
What maximum width is listed?
12 inches.
What minimum length is listed?
30 inches.
What feed range is listed?
30–150+ feet per minute.
How is overspray collected?
One recovery trough captures recoverable overspray.
What captures atomized spray?
Replaceable fiberglass filter media.
What feed motor is listed?
1 hp.
What extraction fan is listed?
3 hp.
What electrical supply is listed?
480 V, three-phase, 60 Hz.
Can it join a finishing line?
Stanza offers combinations with its sanders and drying ovens.
