STANZA MACHINERY | MC/WB-300R Tube & Pipe Coater
MC/WB-300R Vacuum Coater – Water based 360-degree coating featuring 99% transfer efficiency, paired with Infra-Red (IR), Lateral, and Gas Fired Ovens for coat and dry applications.
Our STM Series Water Based Vacuum Coaters are designed to automate the coating of a full range of metal tube and pipe products with waterbased paints, stains, and protective finishes with maximum uniformity and 99% transfer efficiency.
The system consists of a separation tower, vacuum producer, control panel, and a unique application chamber. This application chamber, featuring our “Free Flow Technology”, enhances coating consistency at lower vacuum pressures. This lessens energy consumption, while permitting higher feed speeds. The chamber is also designed for quick, tool-free changeover, resulting in maximized production up-time. The programmable logic controller (PLC) driven system interlocks with machines in line, enabling process integration.
Drying ovens, in combination with the vacuum coaters, include lateral, gas fired, infra-red (IR) and more. When drying vacuum coated materials often a flash off period is needed, allowing the water to evaporate, leaving only the dyes/pigments which color the work piece. After the flash off, heat is introduced to dry what has previously evaporated. Stanza Machinery manufactures ovens to meet speed, production, and coating requirements.
Our STM Series Vacuum Coating equipment is designed and manufactured in the USA and is customizable with a range of options and special configurations to suit your production line needs.
Specifications
| Construction | Polished Stainless Steel |
| Head Arrangements: | Integral and Remote |
| Tube Diameter: | ¾”-6” diameter |
| Application Speeds: | 40-350 fpm depending on profile |
| Reservoir Capacity: | 15 gallons |
| Vacuum Producers: | Regenerative blowers 10-15 hp |
| Tower Filtration: | Stainless steel filters/cleanable |
| Operator Controls: | Remote panel/PLC control |
| Electrical: | 480V 3ph 60Hz |
| Air: | 2 CFM at 90 P.S.I. |
| Machine Tower Dimensions: | 54”W x 60”H x 27”D |
Specifications
STANZA MACHINERY MC/WB-300R Tube & Pipe Coater FAQs
What products does it coat?
Metal tube and pipe.
How is coverage achieved?
Vacuum application provides 360-degree coverage.
What diameters are listed?
3/4–6 inches.
What application speeds are listed?
40–350 feet per minute, depending on profile.
What reservoir capacity is listed?
15 gallons.
What construction is listed?
Polished stainless steel.
Which head arrangements are listed?
Integral and remote.
What vacuum producers are listed?
10–15 hp regenerative blowers.
What tower filtration is listed?
Cleanable stainless steel filters.
What controls are listed?
Remote panel with PLC control.
What electrical supply is listed?
480 V, three-phase, 60 Hz.
What compressed air is listed?
2 cfm at 90 psi.
What are tower dimensions?
54 inches wide × 60 high × 27 deep; not full-line footprint.
Which coatings are described?
Water-based paints, stains and protective finishes.
How is finish cured or dried?
Stanza offers infrared, lateral and gas-fired drying ovens.
