Pillar Machine | TSS – Trim, Score and Saw Machine
The TSS machine was designed to cut materials that are susceptible to tear out as well as for pack cutting of multiple parts at the same time. The saw will feature two counter rotating saws mounted above and below one another. The bottom saw is designed for pre-scoring parts prior to cut off to prevent tear out. The bottom spindle is designed to accept a 6″ diameter scoring saw and is powered by a 1 1/2 HP motor. Spindle speed is 4700 RPM. The top spindle is designed for a 12″ diameter saw blade and is powered by a 3 HP motor with a spindle speed of 4700 RPM as well. Saw blade travel is horizontal via linear bearings. It is powered by a pneumatic cylinder with adjustable flow controls. For Safety, horizontally mounted pneumatic work clamps are installed on each side of the cut-off saw and are equipped with a proximity switch to release only after full saw blade retraction.
The TSS is compatible with various linear positioning systems such as Razorgage.
The TSS performs the following functions:
- Trim
- Score
- Saw
Standard Features:
- Max width: 12″
- Max Height: 2″
- 2 couter rotating saws, one for scoring and the other for the final cut – eliminating tear out.
- User friendly interface
Advantages of The TSS:
- No backer board or chip breakers required
- Tear out free parts every time
- Accurate spindle adjustment for tool alignment
- Part stays fixed while the carriage moves
- Simple to use
- Useful with a varietey of applications (Shutters, Dove Tail drawer material, Passage door material etc)
Options:
- Waste chute
- Additional part clamping options
Specifications
What is the Pillar Machine TSS - Trim, Score and Saw Machine and what primary production role does it serve?
The Pillar Machine TSS - Trim, Score and Saw Machine is a cnc boring, drilling & dowel machine manufactured by Pillar Machine and supplied by Centex Automation. The TSS machine was designed to cut materials that are susceptible to tear out as well as for pack cutting of multiple parts at the same time.
What workpiece capacities and working dimensions are published for the Pillar Machine TSS - Trim, Score and Saw Machine?
Published capacity specifications for the Pillar Machine TSS - Trim, Score and Saw Machine include: Max width: 12 in; Max Height: 2 in. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Pillar Machine TSS - Trim, Score and Saw Machine feature?
The Pillar Machine TSS - Trim, Score and Saw Machine product documentation lists the following working unit and drive specifications: Accurate spindle adjustment for tool alignment; Additional part clamping options.
What is the published max width specification for the Pillar Machine TSS - Trim, Score and Saw Machine?
According to the Pillar Machine technical specification table for the Pillar Machine TSS - Trim, Score and Saw Machine, Max width is rated at 12 in.
What is the published max height specification for the Pillar Machine TSS - Trim, Score and Saw Machine?
According to the Pillar Machine technical specification table for the Pillar Machine TSS - Trim, Score and Saw Machine, Max Height is rated at 2 in.
What additional design and construction highlight (#1) is specified for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: 2 couter rotating saws, one for scoring and the other for the final cut - eliminating tear out.
What additional production capability (#2) is listed for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: User friendly interface.
What mechanical or operational feature (#3) is highlighted on the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: No backer board or chip breakers required.
What equipment configuration detail (#4) is noted in the Pillar Machine TSS - Trim, Score and Saw Machine specifications?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: Tear out free parts every time.
What further technical highlight (#5) is published for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: Accurate spindle adjustment for tool alignment.
What additional shop-floor feature (#6) is documented for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: Part stays fixed while the carriage moves.
What supplemental specification (#7) is listed for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine product specifications state: Simple to use.
Which woodworking shops and production workflows are best suited for the Pillar Machine TSS - Trim, Score and Saw Machine?
The Pillar Machine TSS - Trim, Score and Saw Machine is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking a cnc boring, drilling & dowel machine from Pillar Machine (Custom Machine, Pillar Machine, Score Machine, Trimmer). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Pillar Machine TSS - Trim, Score and Saw Machine on the Centex Automation storefront?
The Pillar Machine TSS - Trim, Score and Saw Machine is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Pillar Machine TSS - Trim, Score and Saw Machine?
Before taking delivery of the Pillar Machine TSS - Trim, Score and Saw Machine, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.