OMAKSAN HOLEMASTER | 4000 X Line Faster
More Milling Power for Heavier Operations
The Holemaster 4000 X Line Faster steps the milling unit up from 2.2 kW to 4 kW, giving shops nearly double the cutting power for thicker materials, harder substrates, and more aggressive milling operations. The same 3-axis servo drilling head with 8 vertical drills, 6 horizontal drills, and 1 saw blade handles top-face and edge drilling at production speeds. Automatic tool measurement and safety mat are standard.
Overview
More Milling Power for Heavier Work
The 4000 X Line Faster shares the same drilling architecture as the X Line HS: 8 vertical drills, 6 horizontal drills, 1 saw blade, 3-axis servo technology, and 1300 mm panel width. The difference is the milling unit. Where the X Line HS uses a 2.2 kW motor, the Faster steps up to 4 kW.
That added power matters for shops processing thicker panels, denser materials such as solid surface or composite substrates, or running aggressive milling operations where a 2.2 kW unit may slow down or wear tools faster. The 4 kW motor helps sustain higher feed rates under load, hold tighter tolerances under aggressive cuts, and reduce cycle time on heavy milling work.
For furniture manufacturers and millwork producers whose work consistently pushes milling demands, the X Line Faster is the right starting point, without the cost of the Smart Faster’s automatic tool changer if you do not need it.
The 4000 X Line Faster is Right For You If…
- Your milling operations push the limits of a 2.2 kW unit
- You process thicker materials or denser substrates such as solid surface
- You do not need an automatic tool changer, saving cost compared with the Smart Faster
- You work with panels up to 1300 mm wide regularly
- Bottom-face drilling is rare or non-existent in your workflow
Features & Options
Standard Equipment and Available Options
The 4000 X Line Faster ships with everything needed for mass-production drilling and heavier milling operations. Automatic tool measurement and safety mat are standard. Optional upgrades add ERP integration and Z-axis extension.
Standard Features
- Omaksan Works control software
- 3-axis servo-driven drilling head
- 8 vertical drilling spindles for top-face drilling
- 6 horizontal drilling spindles for edge drilling
- 1 saw blade for grooving operations
- 4 kW milling unit motor for higher-output milling
- Automatic tool measurement to eliminate manual tool offset entries
- Safety mat with pressure-sensitive auto pause/resume
- Hardware compatibility: Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat
- Unlimited panel length on the X-axis
- 1300 mm maximum panel width on the Y-axis
- Standard Z-axis: 40 mm, with 60 mm optional
- Top-face and 4-edge processing in a single setup
Available Options
- Z-axis extension from 40 mm to 60 mm
- Barcode reader for production integration with ERP and design software
Technical Specifications
| Specification | Details |
|---|---|
| Drill Block Configuration | 1+0 — one top drilling head, no bottom head |
| Control Program | Omaksan Works |
| Maximum Working Area | X: Unlimited · Y: 1300 mm · Z: 40 mm, 60 mm optional |
| Minimum Working Area | X: 200 mm · Y: 70 mm · Z: 10 mm |
| Drive Technology | 3-axis servo |
| Drilling Unit Vertical Spindles | 8 |
| Drilling Unit Horizontal Spindles | 6 |
| Drilling Unit Saw Blades | 1 |
| Milling Unit Motor Power | 4 kW — higher output for heavier milling operations |
| Automatic Tool Measurement | Standard |
| Safety Mat | Standard |
| Barcode Reader | Optional |
| Hardware Compatibility | Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat |
| Applications | Kitchen cabinets, bathroom vanities, modular furniture, casework |
| Origin | Manufactured in Bursa, Turkey |
Specifications
What is the Omaksan Holemaster 4000 X Line Faster and what primary production role does it serve?
The Omaksan Holemaster 4000 X Line Faster is a cnc boring, drilling & dowel machine manufactured by Omaksan and supplied by Centex Automation. The Holemaster 4000 X Line Faster steps the milling unit up from 2.2 kW to 4 kW, giving shops nearly double the cutting power for thicker materials, harder substrates, and more aggressive milling operations.
What workpiece capacities and working dimensions are published for the Omaksan Holemaster 4000 X Line Faster?
Published capacity specifications for the Omaksan Holemaster 4000 X Line Faster include: Maximum Working Area: X: Unlimited Y: 1300 mm Z: 40 mm, 60 mm optional; Minimum Working Area: X: 200 mm Y: 70 mm Z: 10 mm; Standard Z-axis: 40 mm, with 60 mm optional; You work with panels up to 1300 mm wide regularly. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Omaksan Holemaster 4000 X Line Faster feature?
The Omaksan Holemaster 4000 X Line Faster product documentation lists the following working unit and drive specifications: Drill Block Configuration: 1+0 - one top drilling head, no bottom head; Drilling Unit Vertical Spindles: 8; Drilling Unit Horizontal Spindles: 6; Drilling Unit Saw Blades: 1.
What operator control or positioning features are included on the Omaksan Holemaster 4000 X Line Faster?
Published control and setup details for the Omaksan Holemaster 4000 X Line Faster include: Control Program: Omaksan Works; You do not need an automatic tool changer, saving cost compared with the Smart Faster; Omaksan Works control software.
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Omaksan Holemaster 4000 X Line Faster?
Published utility and actuation specifications for the Omaksan Holemaster 4000 X Line Faster state: Barcode Reader: Optional. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the Omaksan Holemaster 4000 X Line Faster?
Regarding machine frame construction, dimensions, and weight, the Omaksan Holemaster 4000 X Line Faster listing states: Applications: Kitchen cabinets, bathroom vanities, modular furniture, casework.
What standard or optional equipment configurations are noted for the Omaksan Holemaster 4000 X Line Faster?
The Omaksan Holemaster 4000 X Line Faster listing notes the following equipment and configuration details: Automatic Tool Measurement: Standard; Safety Mat: Standard. Request a formal equipment quote from Centex Automation to confirm which options match your shop workflow.
What is the published specification specification for the Omaksan Holemaster 4000 X Line Faster?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 X Line Faster, Specification is rated at Details.
What is the published drill block configuration specification for the Omaksan Holemaster 4000 X Line Faster?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 X Line Faster, Drill Block Configuration is rated at 1+0 - one top drilling head, no bottom head.
What is the published control program specification for the Omaksan Holemaster 4000 X Line Faster?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 X Line Faster, Control Program is rated at Omaksan Works.
What is the published maximum working area specification for the Omaksan Holemaster 4000 X Line Faster?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 X Line Faster, Maximum Working Area is rated at X: Unlimited Y: 1300 mm Z: 40 mm, 60 mm optional.
What is the published minimum working area specification for the Omaksan Holemaster 4000 X Line Faster?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 X Line Faster, Minimum Working Area is rated at X: 200 mm Y: 70 mm Z: 10 mm.
Which woodworking shops and production workflows are best suited for the Omaksan Holemaster 4000 X Line Faster?
The Omaksan Holemaster 4000 X Line Faster is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking a cnc boring, drilling & dowel machine from Omaksan (CNC Drilling Center, Nutek). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Omaksan Holemaster 4000 X Line Faster on the Centex Automation storefront?
The Omaksan Holemaster 4000 X Line Faster is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Omaksan Holemaster 4000 X Line Faster?
Before taking delivery of the Omaksan Holemaster 4000 X Line Faster, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.