OMAKSAN HOLEMASTER | 4000 C Line 6X Faster Plus
Conveyor Standard, Efficiency Maximum
The Holemaster 4000 C Line 6X Faster Plus is the most automated machine in the Holemaster lineup. It combines the C Line architecture with an integrated outfeed conveyor as standard equipment, helping keep the production line moving without unnecessary operator handling.
Dual milling motors on both top and bottom enable simultaneous grooving and routing on both surfaces. The machine can finish all tasks in a single pass or process two workpieces at once, minimizing production time and operator handling.
Overview
Maximum Throughput: Conveyor Standard, Dual Milling Both Sides
The 4000 C Line 6X Faster Plus takes the C Line architecture to its full expression. The integrated outfeed conveyor is no longer optional. It comes as standard equipment and is designed for continuous production where panels exit the drilling cell directly into the next operation without operator handling.
The conveyor pace matches the C Line's 140 m/min feed rate, helping eliminate throughput bottlenecks at the machine exit.
The Plus also adds dual milling motors on both top and bottom, allowing grooving and routing operations to happen simultaneously on both surfaces of the panel. For shops where standard grooves run on both faces, such as drawer slides on the bottom or dado grooves on the top, this is a meaningful capability addition over the standard C Line.
The machine can finish all six-sided operations in a single pass or process two workpieces simultaneously, depending on the program. For high-volume cabinet manufacturers running continuous production, the C Line Plus is the most automated single-machine solution in the Holemaster lineup.
The 4000 C Line 6X Faster Plus is Right For You If…
- You are running continuous high-volume production at scale
- You need an integrated outfeed conveyor for downstream operations
- Your production includes grooving or routing on both top and bottom surfaces
- You want the highest level of automation in a single-machine solution
- You are integrating the drilling cell into a fully automated production line
Features & Options
Standard Equipment and Available Options
The 4000 C Line 6X Faster Plus ships with an integrated outfeed conveyor as standard equipment, plus all C Line standards, including dual top drilling units, air-float tables, CNC clamps, dual milling motors, and barcode reader. Laser part length measurement is available as an optional upgrade.
Standard Features
- Omaksan Works control software
- 2+1 drilling configuration with dual top drilling units and one bottom drilling unit
- Integrated outfeed conveyor as standard equipment
- Upper unit: 18 vertical drilling spindles
- Horizontal drilling: 16 spindles
- Lower unit: 9 vertical drilling spindles
- Dual milling motors for top and bottom operations, enabling simultaneous grooving on both surfaces
- Upper milling unit: 4 kW
- Lower milling unit: 2.2 kW
- Feed rate on X-axis: 140 m/min
- Air-float entry and exit tables for frictionless panel movement
- CNC-controlled double clamp system for millimetric accuracy
- Integrated barcode reader compatible with leading design and ERP software
- Single-pass processing on all six sides or dual-workpiece processing
- Milling length measurement
- Safety mat with auto-stop and auto-resume
- Dust extraction: 2× 180 mm upper, 1× 100 mm lower
- Hardware compatibility: Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat
- Total installed power: 34 kW
- Working pressure: 7 bar
Available Options
- Laser part length measurement
Technical Specifications
| Specification | Details |
|---|---|
| Drill Block Configuration | 2+1 — dual top drilling units, single bottom drilling unit |
| Control Program | Omaksan Works |
| Panel Length | 80–4500 mm |
| Panel Width | 40–1200 mm |
| Panel Thickness | 8–45 mm |
| Feed Rate - X-axis | 140 m/min |
| Number of Drilling Groups | 2+1 |
| Integrated Outfeed Conveyor | Standard |
| Dual Milling Motors - Top and Bottom | Standard — simultaneous grooving on both surfaces |
| Vertical Drills - Upper Group | 18 |
| Vertical Drills - Lower Group | 9 |
| Horizontal Drills | 16 |
| Milling Unit - Upper | 4 kW |
| Milling Unit - Lower | 2.2 kW |
| Total Installed Power | 34 kW |
| Working Pressure | 7 bar |
| Machine Dimensions - L × W × H | 4840 × 2490 × 2100 mm |
| Machine Weight | 2200 kg |
| Extraction System | Air-float table at entry and exit |
| Clamp System | CNC-controlled double clamp |
| Barcode Reader | Standard — compatible with leading design and ERP software |
| Milling Length Measurement | Standard |
| Laser Part Length Measurement | Optional |
| Dust Extraction Diameter | 2× 180 mm upper, 1× 100 mm lower |
| Safety Mat | Standard — auto-stop and auto-resume |
| Hardware Compatibility | Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat |
| Applications | Kitchen cabinets, bathroom vanities, modular furniture, casework |
| Origin | Manufactured in Bursa, Turkey |
Specifications
What is the Omaksan Holemaster 4000 C Line 6X Faster Plus and what primary production role does it serve?
The Omaksan Holemaster 4000 C Line 6X Faster Plus is a cnc router manufactured by Omaksan and supplied by Centex Automation. The Holemaster 4000 C Line 6X Faster Plus is the most automated machine in the Holemaster lineup.
What workpiece capacities and working dimensions are published for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
Published capacity specifications for the Omaksan Holemaster 4000 C Line 6X Faster Plus include: Panel Length: 80-4500 mm; Panel Width: 40-1200 mm; Panel Thickness: 8-45 mm; Feed Rate - X-axis: 140 m/min. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Omaksan Holemaster 4000 C Line 6X Faster Plus feature?
The Omaksan Holemaster 4000 C Line 6X Faster Plus product documentation lists the following working unit and drive specifications: Drill Block Configuration: 2+1 - dual top drilling units, single bottom drilling unit; Number of Drilling Groups: 2+1; Dual Milling Motors - Top and Bottom: Standard - simultaneous grooving on both surfaces; Vertical Drills - Upper Group: 18.
How does material feeding, speed, or part transport operate on the Omaksan Holemaster 4000 C Line 6X Faster Plus?
For material transport and cycle speed, the Omaksan Holemaster 4000 C Line 6X Faster Plus specifications list: Integrated Outfeed Conveyor: Standard; You need an integrated outfeed conveyor for downstream operations; Integrated outfeed conveyor as standard equipment.
What operator control or positioning features are included on the Omaksan Holemaster 4000 C Line 6X Faster Plus?
Published control and setup details for the Omaksan Holemaster 4000 C Line 6X Faster Plus include: Control Program: Omaksan Works; Clamp System: CNC-controlled double clamp; Omaksan Works control software.
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
Published utility and actuation specifications for the Omaksan Holemaster 4000 C Line 6X Faster Plus state: Extraction System: Air-float table at entry and exit; Barcode Reader: Standard - compatible with leading design and ERP software; Dust extraction: 2x 180 mm upper, 1x 100 mm lower. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
Regarding machine frame construction, dimensions, and weight, the Omaksan Holemaster 4000 C Line 6X Faster Plus listing states: Machine Dimensions - L x W x H: 4840 x 2490 x 2100 mm; Machine Weight: 2200 kg; Applications: Kitchen cabinets, bathroom vanities, modular furniture, casework.
What standard or optional equipment configurations are noted for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
The Omaksan Holemaster 4000 C Line 6X Faster Plus listing notes the following equipment and configuration details: Safety Mat: Standard - auto-stop and auto-resume; Your production includes grooving or routing on both top and bottom surfaces. Request a formal equipment quote from Centex Automation to confirm which options match your shop workflow.
What is the published specification specification for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 C Line 6X Faster Plus, Specification is rated at Details.
What is the published drill block configuration specification for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 C Line 6X Faster Plus, Drill Block Configuration is rated at 2+1 - dual top drilling units, single bottom drilling unit.
What is the published control program specification for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 C Line 6X Faster Plus, Control Program is rated at Omaksan Works.
What is the published panel length specification for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
According to the Omaksan technical specification table for the Omaksan Holemaster 4000 C Line 6X Faster Plus, Panel Length is rated at 80-4500 mm.
Which woodworking shops and production workflows are best suited for the Omaksan Holemaster 4000 C Line 6X Faster Plus?
The Omaksan Holemaster 4000 C Line 6X Faster Plus is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking a cnc router from Omaksan (CNC Drilling Center, Nutek). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Omaksan Holemaster 4000 C Line 6X Faster Plus on the Centex Automation storefront?
The Omaksan Holemaster 4000 C Line 6X Faster Plus is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Omaksan Holemaster 4000 C Line 6X Faster Plus?
Before taking delivery of the Omaksan Holemaster 4000 C Line 6X Faster Plus, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.