Mereen-Johnson | Model 524-DC/SR 2+4 Edging Multiple Rip Saw
Precision, Flexible Production Without All Those Edgings
This 2-arbor saw represents the ultimate in production flexibility featuring a first arbor equipped with two shifting blades to virtually eliminate edge strips and a second arbor with up to four shifting blades.
Value
- Extremely robust construction providing the greatest durability and longevity.
- Designed for minimal maintenance providing the lowest total cost of ownership.
- The industry’s best re-sale value.
- The best warranty and after sales service
Mereen-Johnson manufacturers a complete line of gang rip saw infeed systems from manual to fully automated, integrated with Rip Navigator optimizing systems featuring the latest board scanning technology.
Increase Yield and Productivity
These systems will provide better feeding accuracy, detailed production and vendor reporting, improved lumber yield, higher profits and greater operator safety.
Specifications
Capacity: 24” arbor space,thickness to 2-1/2” using 14” dia. tooling, 30” min. length for glue
joint accuracy.
Shifting Saw(s): First arbor; Two shifting hoggers
Second arbor: One to four shifting blade(s) in combination with fixed center blade.
1” min. width net rip between saws.
Arbor Drive: Direct drive 75 HP, 3600 RPM TEFC MereenJohnson saw arbor motor (no belts to tension or replace).
Feed Drive: 10 HP with variable frequency speed control, infinately variable, 30’-235’ per minute.
Feed Bed: “Posi-Feed” friction feed bed of structural aluminum feed slats with replaceable steel backed rubber inserts carried on precision Double-Vee hardened steel feed chains and track. Oil mist lubrication of feed system with low oil level auto feed shut-off
Hold Downs: Eight 4” dia. air loaded press rolls. Air loaded traveling shoes provided for each shifting blade.
Anti-Kickbacks: Single lower, double upper infeed. Single upper outfeed.
Dust Collection: Two 10” dia. and one 5” dia. upper, two 5” dia. lower, 7,440 total CFM required.
Electrical: Arranged for 3/60/230 or 460 volt power supply (other electrics available).
Shipping Information: Nominal 13’ by 6’ by 6’ shipping skid, 14,400 lbs, 6,550 kg
What is the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw and what primary production role does it serve?
The Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw is an industrial rip & table saw manufactured by Mereen-Johnson and supplied by Centex Automation. This 2-arbor saw represents the ultimate in production flexibility featuring a first arbor equipped with two shifting blades to virtually eliminate edge strips and a second arbor with up to four shifting blades.
How does the Mereen-Johnson documentation describe the design and operation of the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: - Extremely robust construction providing the greatest durability and longevity.; - Designed for minimal maintenance providing the lowest total cost of ownership.; - The industry's best re-sale value.; - The best warranty and after sales service.
What workflow and productivity advantage is highlighted in the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw overview?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Mereen-Johnson manufacturers a complete line of gang rip saw infeed systems from manual to fully automated, integrated with Rip Navigator optimizing systems featuring the latest board scanning technology.
What additional application detail does Mereen-Johnson provide for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: These systems will provide better feeding accuracy, detailed production and vendor reporting, improved lumber yield, higher profits and greater operator safety.
How does the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw support repeatability and operator workflow on the shop floor?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Capacity: 24" arbor space,thickness to 2-1/2" using 14" dia.
What further operational context is provided in the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: length for glue; joint accuracy.
What additional production detail is noted in the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw overview?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Shifting Saw(s): First arbor; Two shifting hoggers.
What additional overview detail (#7) is stated for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Second arbor: One to four shifting blade(s) in combination with fixed center blade.; 1" min.
What additional overview detail (#8) is stated for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: width net rip between saws.
What additional overview detail (#9) is stated for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Arbor Drive: Direct drive 75 HP, 3600 RPM TEFC MereenJohnson saw arbor motor (no belts to tension or replace).
What additional overview detail (#10) is stated for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Feed Drive: 10 HP with variable frequency speed control, infinately variable, 30'-235' per minute.
What additional overview detail (#11) is stated for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
According to the published Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw description: Feed Bed: "Posi-Feed" friction feed bed of structural aluminum feed slats with replaceable steel backed rubber inserts carried on precision Double-Vee hardened steel feed chains and track.
Which woodworking shops and production workflows are best suited for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
The Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial rip & table saw from Mereen-Johnson (Edging Multiple Ripsaw, Mereen-Johnson, Ripsaw). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw on the Centex Automation storefront?
The Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw?
Before taking delivery of the Mereen-Johnson Model 524-DC/SR 2+4 Edging Multiple Rip Saw, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.
