Leadermac | Smartmac with Auto Width Set Control System (Random Width Moulder)

What is the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) and what primary production role does it serve?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) is an industrial moulder, shaper & tenoner manufactured by Leadermac and supplied by Centex Automation. Equipped with auto width set control system.

What workpiece capacities and working dimensions are published for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
Published capacity specifications for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) include: Working Width: 50 - 230mm / 2" - 9" (narrower or wider available on request); Working Thickness: 10 - 25 mm / .4" - 5" (thinner on request); Equipped with auto width set control system; The moulder feeder operator puts the next piece on the table against the fence and forwards it past the laser light and stops. The sensor advances a probe to measure the material width, then the operator side head automatically moves to position with servo motor and ball screw for fast and accurate positioning. Verify that your largest and smallest production parts fall within this envelope before ordering.

What working units, motors, or tooling specifications does the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) feature?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) product documentation lists the following working unit and drive specifications: Feed Motor: 5 HP with VFP Drive; 2 NC controls for the radial adjustment of left and top spindle; Automatic lubrication to lubricate plate at left spindle.

How does material feeding, speed, or part transport operate on the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
For material transport and cycle speed, the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) specifications list: Feeding Speed: 6 - 24 m/min / 20 - 80 FPM; Voltage: 230 / 460 / 575 Volts, 3 phase, 60 cycle.

What operator control or positioning features are included on the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
Published control and setup details for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) include: Siemens 9" touch screen control system (Memory 300 sets).

What is the published working width specification for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
According to the Leadermac technical specification table for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), Working Width is rated at 50 - 230mm / 2" - 9" (narrower or wider available on request).

What is the published working thickness specification for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
According to the Leadermac technical specification table for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), Working Thickness is rated at 10 - 25 mm / .4" - 5" (thinner on request).

What is the published feeding speed specification for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
According to the Leadermac technical specification table for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), Feeding Speed is rated at 6 - 24 m/min / 20 - 80 FPM.

What is the published feed motor specification for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
According to the Leadermac technical specification table for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), Feed Motor is rated at 5 HP with VFP Drive.

What is the published voltage specification for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
According to the Leadermac technical specification table for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), Voltage is rated at 230 / 460 / 575 Volts, 3 phase, 60 cycle.

What additional design and construction highlight (#1) is specified for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) product specifications state: Equipped with auto width set control system.

What additional production capability (#2) is listed for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) product specifications state: Siemens 9" touch screen control system (Memory 300 sets).

Which woodworking shops and production workflows are best suited for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial moulder, shaper & tenoner from Leadermac (Leadermac, Moulder). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.

How is pricing handled for the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) on the Centex Automation storefront?
The Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder) is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.

What facility utility checks should a shop perform before installing the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder)?
Before taking delivery of the Leadermac Smartmac with Auto Width Set Control System (Random Width Moulder), verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.