Leadermac | Gluemac Moulder Series
Features
Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation)
- 4 to 6 Heads – 9″, 10.2″, 12″, & 13″ Widths
- One piece machine frame specially heat treated & stress relieved
- 1-1/2″, 40mm, 1-13/16″ or 50mm diameter spindles standard
- SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
- 6000, 7200, or 8000 RPM optional
- Each spindle is driven by individual motors
- Tables/Fences and Chipbreakers are hard chrome plated
- Full Cardan Shaft drive with feed speeds up to 82 FPM
- Top rolls variable pneumatic tensioned
- Full width bottom driven bedrolls
- Pneumatic tension top chipbreakers & roll holdovers – Optional
- Easy head adjustment by mechanical digital readouts
- Dual Digital Readout available for radial setting (NS & Tops)
- REC-705B Quik-TrueSet Setworks optional
- Universal head or rip section optional
- Safety enclosure serves as chip guard and greatly reduces noise
Specifications
What is the Leadermac Gluemac Moulder Series and what primary production role does it serve?
The Leadermac Gluemac Moulder Series is an industrial moulder, shaper & tenoner manufactured by Leadermac and supplied by Centex Automation. Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation).
What workpiece capacities and working dimensions are published for the Leadermac Gluemac Moulder Series?
Published capacity specifications for the Leadermac Gluemac Moulder Series include: 4 to 6 Heads - 9 in., 10.2 in., 12 in., and 13 in. Widths; Full width bottom driven bedrolls. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Leadermac Gluemac Moulder Series feature?
The Leadermac Gluemac Moulder Series product documentation lists the following working unit and drive specifications: 1-1/2 in., 40mm, 1-13/16 in. or 50mm diameter spindles standard; SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle); 6000, 7200, or 8000 RPM optional; Each spindle is driven by individual motors.
How does material feeding, speed, or part transport operate on the Leadermac Gluemac Moulder Series?
For material transport and cycle speed, the Leadermac Gluemac Moulder Series specifications list: Full Cardan Shaft drive with feed speeds up to 82 FPM.
What operator control or positioning features are included on the Leadermac Gluemac Moulder Series?
Published control and setup details for the Leadermac Gluemac Moulder Series include: Dual Digital Readout available for radial setting (NS and Tops).
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Leadermac Gluemac Moulder Series?
Published utility and actuation specifications for the Leadermac Gluemac Moulder Series state: Top rolls variable pneumatic tensioned; Pneumatic tension top chipbreakers and roll holdovers - Optional. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the Leadermac Gluemac Moulder Series?
Regarding machine frame construction, dimensions, and weight, the Leadermac Gluemac Moulder Series listing states: One piece machine frame specially heat treated and stress relieved; Tables/Fences and Chipbreakers are hard chrome plated.
What standard or optional equipment configurations are noted for the Leadermac Gluemac Moulder Series?
The Leadermac Gluemac Moulder Series listing notes the following equipment and configuration details: REC-705B Quik-TrueSet Setworks optional. Request a formal equipment quote from Centex Automation to confirm which options match your shop workflow.
What additional design and construction highlight (#1) is specified for the Leadermac Gluemac Moulder Series?
The Leadermac Gluemac Moulder Series product specifications state: 4 to 6 Heads - 9 in., 10.2 in., 12 in., and 13 in. Widths.
What additional production capability (#2) is listed for the Leadermac Gluemac Moulder Series?
The Leadermac Gluemac Moulder Series product specifications state: One piece machine frame specially heat treated and stress relieved.
What mechanical or operational feature (#3) is highlighted on the Leadermac Gluemac Moulder Series?
The Leadermac Gluemac Moulder Series product specifications state: 1-1/2 in., 40mm, 1-13/16 in. or 50mm diameter spindles standard.
What equipment configuration detail (#4) is noted in the Leadermac Gluemac Moulder Series specifications?
The Leadermac Gluemac Moulder Series product specifications state: SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle).
Which woodworking shops and production workflows are best suited for the Leadermac Gluemac Moulder Series?
The Leadermac Gluemac Moulder Series is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial moulder, shaper & tenoner from Leadermac (Leadermac, Moulder). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Leadermac Gluemac Moulder Series on the Centex Automation storefront?
The Leadermac Gluemac Moulder Series is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Leadermac Gluemac Moulder Series?
Before taking delivery of the Leadermac Gluemac Moulder Series, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.