Leadermac | 523C Short Stock Moulder with Feedmac 08 Random Length Feeder
Features
- Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
- The pieces are advanced to a short stock feeder at the edge of the moulder ensuring pieces are advanced butt to butt, allowing down to 4” long pieces to be fed through the machine. With a grooved bed, and extra hold down/hold over pressure throughout the machine, the pieces can be advanced through the moulder successfully.
Specifications
| Min. working width: | 20 mm / 3/4” |
| Max. working width: | 230 mm/ 9” |
| Min. working thickness: | 10 mm / .4” (thinner on request) |
| Max. working thickness: | 150 mm / 5.9” |
| Min. length of workpiece | |
| when feeded consecutively: | 100 mm / 4” |
| Min. length of single work piece: | 800 mm / 31.4” |
| (note: pieces cannot be square) | |
| 1st bottom spindle: | 7.5 HP – 20 HP |
| 2nd right spindle: | 7.5 HP – 15 HP |
| 3rd left spindle: | 7.5 HP – 15 HP |
| 4th top spindle: | 10 HP – 25 HP |
| 5th last bottom spindle: | 10 HP – 25 HP |
| Up & down motor: | 3/4 HP x 1 |
| Feed motor: | 5 HP / inverter x 1 |
| Spindle diameter: | 40 mm / 1-13/16 / 1-1/2 |
| Spindle RPM: | 6,000 RPM (7,200 optional) |
| Feed speed | 6 – 24 m/min / 20 – 80 FPM |
What is the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder and what primary production role does it serve?
The Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder is an industrial moulder, shaper & tenoner manufactured by Leadermac and supplied by Centex Automation. Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
What workpiece capacities and working dimensions are published for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
Published capacity specifications for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder include: Min. working width: 20 mm / 3/4"; Max. working width: 230 mm/ 9"; Min. working thickness: 10 mm / .4" (thinner on request); Max. working thickness: 150 mm / 5.9". Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder feature?
The Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder product documentation lists the following working unit and drive specifications: 1st bottom spindle: 7.5 HP - 20 HP; 2nd right spindle: 7.5 HP - 15 HP; 3rd left spindle: 7.5 HP - 15 HP; 4th top spindle: 10 HP - 25 HP.
How does material feeding, speed, or part transport operate on the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
For material transport and cycle speed, the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder specifications list: when feeded consecutively: 100 mm / 4"; Feed speed: 6 - 24 m/min / 20 - 80 FPM; Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
What is the published min. working width specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, Min. working width is rated at 20 mm / 3/4".
What is the published max. working width specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, Max. working width is rated at 230 mm/ 9".
What is the published min. working thickness specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, Min. working thickness is rated at 10 mm / .4" (thinner on request).
What is the published max. working thickness specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, Max. working thickness is rated at 150 mm / 5.9".
What is the published when feeded consecutively specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, when feeded consecutively is rated at 100 mm / 4".
What is the published min. length of single work piece specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, Min. length of single work piece is rated at 800 mm / 31.4".
What is the published 1st bottom spindle specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, 1st bottom spindle is rated at 7.5 HP - 20 HP.
What is the published 2nd right spindle specification for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
According to the Leadermac technical specification table for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, 2nd right spindle is rated at 7.5 HP - 15 HP.
Which woodworking shops and production workflows are best suited for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
The Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial moulder, shaper & tenoner from Leadermac (Leadermac, Moulder). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder on the Centex Automation storefront?
The Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder?
Before taking delivery of the Leadermac 523C Short Stock Moulder with Feedmac 08 Random Length Feeder, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.