Skip to content
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery

Leadermac | 131HM Roll Feed Short Block Ripsaw

by Leadermac

Features

MAIN FRAME, MACHINE BED & ENCLOSURE

  • 1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration
  • 43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head end
  • All Bedplates, Tables and Fences are Hard Chromed
  • Lift up sound and safety Enclosure including safety interlocks and good lighting

DRIVE INCLUDES

  • Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
  • Powered rise and fall to extra heavy duty feed support beam by 3/4 hp.
  • Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for the best, most rigid upper beam support.
  • All top feed rolls and pressure elements rise & fall with the top beam. Safety switches are included at extreme points
  • 6 Top Driven Full Width Feed Rolls
  • All Top Rolls are air tensioned with 3 Stage Pressure Setting of Feed Rolls. This compensates for large variances in work piece thickness.
  • Top Steel feed rolls are hardened and chromed to resist wear and to prevent chips & shavings from sticking to them
  • 4 Driven Bottom Rolls – all full width. All are Cardan Shaft drive
  • Infinitely variable feed speeds with inverter and feed speed LED display 20 – 165 FPM
    (6 – 36 m/min) Feed motor power 10 hp
  • Feed roll diameter 5.5” / 140mm

SPINDLE ASSEMBLY

  • Spindle is Standard 3200 RPM and belt driven (other RPM’s – optional – no charge)
  • 50mm diameter spindle with 70mm OD with Dble Keys – Gang Sleeve
  • Spindles are manufactured from SCM-439 tool steel (Imported from Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with 2 pairs of NSK-RHP ABEC 7 Duplex Super high precision high speed Bearings to provide the best in cutting stability with permanent accuracy. Spindle Tolerance is guaranteed to +/-0.002mm / 0.00007” accuracy. They are permanent grease lubricated and are labyrinth sealed to prevent against dust and water.
  • Hydro-Loc Quick change Outboard Bearing Assembly on end of the shaft
  • Electric Height Adjustment of spindle from front – Easy to operate station
Std. HP Swing Hood Size
Bottom Spindle 75 HP 10″ 7.9″ (200mm)
Note: Larger or smaller HPs available

CHIPBREAKERS, FENCES & HOLDOWNS/HOLDOVERS, ETC.

  • Tables, Bedplates, Pressure Plate and Fence is Hard Chromed

MISCELLANEOUS features and inclusions

  • Centralized lubrication system to all main slides
  • Dust Hood
  • Toolkit, Instruction and maintenance manual, electrical diagram and parts list

ELECTRICAL

  • TECO-Westinghouse or Siemens – Electric Motors – excellent quality & heavy duty
  • Limit switch at infeed to prevent feeding oversized material and double ups
  • I.E.C. – Telemecanique-Square D Electrics meet or exceed UL/CSA Standards
  • Machines are equipped with Wye-Delta Soft Starters, main disconnect, multiple E Stops and 230/460 or 575/3/60 electrics.
Specifications
Thickness Material .4” to 2.25”  Note – to .25” thick and/or to thicker is optional
Width Material 12.2” – between outside blades
Minimum Length Material: 7.8” (200mm)

What is the Leadermac 131HM Roll Feed Short Block Ripsaw and what primary production role does it serve?
The Leadermac 131HM Roll Feed Short Block Ripsaw is an industrial rip & table saw manufactured by Leadermac and supplied by Centex Automation. 1 Piece - Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration.

What workpiece capacities and working dimensions are published for the Leadermac 131HM Roll Feed Short Block Ripsaw?
Published capacity specifications for the Leadermac 131HM Roll Feed Short Block Ripsaw include: Std. HP: Swing / Hood Size; Thickness Material: .4" to 2.25" Note - to .25" thick and/or to thicker is optional; Width Material: 12.2" - between outside blades; Minimum Length Material: 7.8" (200mm). Verify that your largest and smallest production parts fall within this envelope before ordering.

What working units, motors, or tooling specifications does the Leadermac 131HM Roll Feed Short Block Ripsaw feature?
The Leadermac 131HM Roll Feed Short Block Ripsaw product documentation lists the following working unit and drive specifications: Bottom Spindle: 75 HP / 10 in. / 7.9 in. (200mm); 43" (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) - measured from Btm. Head Infeed Bed Plate - head end; Powered rise and fall to extra heavy duty feed support beam by 3/4 hp; Infinitely variable feed speeds with inverter and feed speed LED display 20 - 165 FPM; (6 - 36 m/min) Feed motor power 10 hp.

How does material feeding, speed, or part transport operate on the Leadermac 131HM Roll Feed Short Block Ripsaw?
For material transport and cycle speed, the Leadermac 131HM Roll Feed Short Block Ripsaw specifications list: Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station; Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for the best, most rigid upper beam support; All top feed rolls and pressure elements rise and fall with the top beam. Safety switches are included at extreme points.

What machine construction, table size, footprint, or weight figures are listed for the Leadermac 131HM Roll Feed Short Block Ripsaw?
Regarding machine frame construction, dimensions, and weight, the Leadermac 131HM Roll Feed Short Block Ripsaw listing states: All Bedplates, Tables and Fences are Hard Chromed; Tables, Bedplates, Pressure Plate and Fence is Hard Chromed.

What standard or optional equipment configurations are noted for the Leadermac 131HM Roll Feed Short Block Ripsaw?
The Leadermac 131HM Roll Feed Short Block Ripsaw listing notes the following equipment and configuration details: I.E.C. - Telemecanique-Square D Electrics meet or exceed UL/CSA Standards. Request a formal equipment quote from Centex Automation to confirm which options match your shop workflow.

What is the published std. hp specification for the Leadermac 131HM Roll Feed Short Block Ripsaw?
According to the Leadermac technical specification table for the Leadermac 131HM Roll Feed Short Block Ripsaw, Std. HP is rated at Swing / Hood Size.

What is the published bottom spindle specification for the Leadermac 131HM Roll Feed Short Block Ripsaw?
According to the Leadermac technical specification table for the Leadermac 131HM Roll Feed Short Block Ripsaw, Bottom Spindle is rated at 75 HP / 10 in. / 7.9 in. (200mm).

What is the published thickness material specification for the Leadermac 131HM Roll Feed Short Block Ripsaw?
According to the Leadermac technical specification table for the Leadermac 131HM Roll Feed Short Block Ripsaw, Thickness Material is rated at .4" to 2.25" Note - to .25" thick and/or to thicker is optional.

What is the published width material specification for the Leadermac 131HM Roll Feed Short Block Ripsaw?
According to the Leadermac technical specification table for the Leadermac 131HM Roll Feed Short Block Ripsaw, Width Material is rated at 12.2" - between outside blades.

What is the published minimum length material specification for the Leadermac 131HM Roll Feed Short Block Ripsaw?
According to the Leadermac technical specification table for the Leadermac 131HM Roll Feed Short Block Ripsaw, Minimum Length Material is rated at 7.8" (200mm).

What additional design and construction highlight (#1) is specified for the Leadermac 131HM Roll Feed Short Block Ripsaw?
The Leadermac 131HM Roll Feed Short Block Ripsaw product specifications state: 1 Piece - Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration.

Which woodworking shops and production workflows are best suited for the Leadermac 131HM Roll Feed Short Block Ripsaw?
The Leadermac 131HM Roll Feed Short Block Ripsaw is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial rip & table saw from Leadermac (Leadermac, Ripsaw). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.

How is pricing handled for the Leadermac 131HM Roll Feed Short Block Ripsaw on the Centex Automation storefront?
The Leadermac 131HM Roll Feed Short Block Ripsaw is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.

What facility utility checks should a shop perform before installing the Leadermac 131HM Roll Feed Short Block Ripsaw?
Before taking delivery of the Leadermac 131HM Roll Feed Short Block Ripsaw, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.

Request a quote

Leadermac | 131HM Roll Feed Short Block Ripsaw

Privacy policy