JLT | #720A (#78G) Face Frame Table
JLT’s Heavy Duty, Sturdy, and Well Built Face Frame Table
Features:
-
(2) Sizes Available:
- 5′ x 8′
- 5′ x 12′
- The base model has a 5’ x 8’ layup surface; 25% more area than the typical 4’x8’ face frame table.
- It has an open end to handle oversized face frame assemblies
- The longer 5’ x 12’ model provides a solution for oversized face frame assemblies or can provide an efficient workstation for two operators
- Extra clamping arms can be purchased separately to make layup easier
- Newly designed welded main frame and backing sheets prevent warping. Makes for the best face frame layup surface
- New Melamine wrapped backed surface will hold up to daily use, resist PLA glue adhesion, and provides a smooth layup surface. Easily replaced if damaged
- Innovative Vertical Pressure Arm with ball bearing roller assemblies provide smooth movement on the clamping arm
- Master Switch, a single pneumatic lever action allows the operator to toggle all (5) clamping pistons from one control. Individual levers are still reserved if necessary
- The clamping pistons (air cylinders) are completely adjustable. They easily slide into position and lock in place with a twist handle
Machine Footprint: 148″L x 70″H x 48″W
Specifications
What is the JLT Clamps #720A (#78G) Face Frame Table and what primary production role does it serve?
The JLT Clamps #720A (#78G) Face Frame Table is an industrial door, case & frame clamping machine manufactured by JLT Clamps and supplied by Centex Automation. Machine Footprint: 148 in.L x 70 in.H x 48 in.W.
What workpiece capacities and working dimensions are published for the JLT Clamps #720A (#78G) Face Frame Table?
Published capacity specifications for the JLT Clamps #720A (#78G) Face Frame Table include: Sizes Available: 5 ft. x 8 ft. and 5 ft. x 12 ft; full-length aluminum squaring fences. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the JLT Clamps #720A (#78G) Face Frame Table feature?
The JLT Clamps #720A (#78G) Face Frame Table product documentation lists the following working unit and drive specifications: The longer 5' x 12' model provides a solution for oversized face frame assemblies or can provide an efficient workstation for two operators Extra clamping arms can be purchased separately to make layup easier; New Melamine wrapped backed surface will hold up to daily use, resist PLA glue adhesion, and provides a smooth layup surface. Easily replaced if damaged; Innovative Vertical Pressure Arm with ball bearing roller assemblies provide smooth movement on the clamping arm Master Switch, a single pneumatic lever action allows the operator to toggle all (5) clamping pistons from one control. Individual levers are still reserved if necessary; The clamping pistons (air cylinders) are completely adjustable. They easily slide into position and lock in place with a twist handle.
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the JLT Clamps #720A (#78G) Face Frame Table?
Published utility and actuation specifications for the JLT Clamps #720A (#78G) Face Frame Table state: #720A (#78G) Pneumatic Face Frame Assembly Table: 48" x 96" (4' x 8') white melamine surface on heavy tubular steel frame. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the JLT Clamps #720A (#78G) Face Frame Table?
Regarding machine frame construction, dimensions, and weight, the JLT Clamps #720A (#78G) Face Frame Table listing states: The base model has a 5' x 8' layup surface; 25% more area than the typical 4'x8' face frame table. It has an open end to handle oversized face frame assemblies; Newly designed welded main frame and backing sheets prevent warping. Makes for the best face frame layup surface.
What is the published sizes available specification for the JLT Clamps #720A (#78G) Face Frame Table?
According to the JLT Clamps technical specification table for the JLT Clamps #720A (#78G) Face Frame Table, Sizes Available is rated at 5 ft. x 8 ft. and 5 ft. x 12 ft.
What additional design and construction highlight (#1) is specified for the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: The base model has a 5' x 8' layup surface; 25% more area than the typical 4'x8' face frame table. It has an open end to handle oversized face frame assemblies.
What additional production capability (#2) is listed for the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: The longer 5' x 12' model provides a solution for oversized face frame assemblies or can provide an efficient workstation for two operators Extra clamping arms can be purchased separately to make layup easier.
What mechanical or operational feature (#3) is highlighted on the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: Newly designed welded main frame and backing sheets prevent warping. Makes for the best face frame layup surface.
What equipment configuration detail (#4) is noted in the JLT Clamps #720A (#78G) Face Frame Table specifications?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: New Melamine wrapped backed surface will hold up to daily use, resist PLA glue adhesion, and provides a smooth layup surface. Easily replaced if damaged.
What further technical highlight (#5) is published for the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: Innovative Vertical Pressure Arm with ball bearing roller assemblies provide smooth movement on the clamping arm Master Switch, a single pneumatic lever action allows the operator to toggle all (5) clamping pistons from one control. Individual levers are still reserved if necessary.
What additional shop-floor feature (#6) is documented for the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table product specifications state: The clamping pistons (air cylinders) are completely adjustable. They easily slide into position and lock in place with a twist handle.
Which woodworking shops and production workflows are best suited for the JLT Clamps #720A (#78G) Face Frame Table?
The JLT Clamps #720A (#78G) Face Frame Table is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial door, case & frame clamping machine from JLT Clamps (Clamp System, Face Frame Tables, JLT). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the JLT Clamps #720A (#78G) Face Frame Table on the Centex Automation storefront?
The JLT Clamps #720A (#78G) Face Frame Table is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the JLT Clamps #720A (#78G) Face Frame Table?
Before taking delivery of the JLT Clamps #720A (#78G) Face Frame Table, verify your shop's clean, dry compressed air supply (PSI and CFM required for pneumatic clamping cylinders or tighteners) and floor space clearance for operator loading and maintenance access.
