JLT | #717A-TDC Triple Door Clamp
Large Capacity, Versatile, and Productive for a Wide Variety of Cabinet Doors and Large Cabinet End Panels
PRODUCE up to 275+ Cabinet Doors per day
Features:
- Large Capacity and Versatile for a Wide Variety of Stile and Rail Cabinet Door Sizes.
- 38″ x 97″ Overall Capacity
- Includes (4) Vertical Clamps and (1) Horizontal Clamp (30 Sq. In Cylinder on the Horizontal Clamp)
- (3) Total Squaring Sections for Clamping and Squaring of Multiple Cabinet Doors
- Single Lever Valve Air Activation
- Faster Changeover with the Cross Clamps Adjusting in a Single Motion
- Clamp & Square Multiple Cabinet Doors with Vertical Center Rail – (2) 38″ x 46″ Doors Side by Side Double Door Clamping.
- 100% Heavy Duty Steel Construction.
- Convenient 60 Degree Vertical Working Angle.
Enhanced Features from the Tried & True #79K Design:
- Intuitive Pin System allows even Quicker and Easier setup than ever before.
- Cylinders Located in the back of the machine to Provide Operator with Additional Working Space.
- Redesigned Jaws with Thumb Plate for Increased Efficiency.
- Thicker Push Bars Decrease Daily Wear and Tear.
Machine Footprint: 116″L x 70″H x 44″W
Specifications
What is the JLT Clamps #717A-TDC Triple Door Clamp and what primary production role does it serve?
The JLT Clamps #717A-TDC Triple Door Clamp is an industrial door, case & frame clamping machine manufactured by JLT Clamps and supplied by Centex Automation. PRODUCE up to 275+ Cabinet Doors per day.
What workpiece capacities and working dimensions are published for the JLT Clamps #717A-TDC Triple Door Clamp?
Published capacity specifications for the JLT Clamps #717A-TDC Triple Door Clamp include: Large Capacity and Versatile for a Wide Variety of Stile and Rail Cabinet Door Sizes; 38 in. x 97 in. Overall Capacity. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the JLT Clamps #717A-TDC Triple Door Clamp feature?
The JLT Clamps #717A-TDC Triple Door Clamp product documentation lists the following working unit and drive specifications: Includes (4) Vertical Clamps and (1) Horizontal Clamp (30 Sq. In Cylinder on the Horizontal Clamp); (3) Total Squaring Sections for Clamping and Squaring of Multiple Cabinet Doors; Faster Changeover with the Cross Clamps Adjusting in a Single Motion; Clamp and Square Multiple Cabinet Doors with Vertical Center Rail - (2) 38 in. x 46 in. Doors Side by Side Double Door Clamping.
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the JLT Clamps #717A-TDC Triple Door Clamp?
Published utility and actuation specifications for the JLT Clamps #717A-TDC Triple Door Clamp state: Single Lever Valve Air Activation. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the JLT Clamps #717A-TDC Triple Door Clamp?
Regarding machine frame construction, dimensions, and weight, the JLT Clamps #717A-TDC Triple Door Clamp listing states: 100% Heavy Duty Steel Construction.
What additional design and construction highlight (#1) is specified for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: Large Capacity and Versatile for a Wide Variety of Stile and Rail Cabinet Door Sizes.
What additional production capability (#2) is listed for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: 38 in. x 97 in. Overall Capacity.
What mechanical or operational feature (#3) is highlighted on the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: Includes (4) Vertical Clamps and (1) Horizontal Clamp (30 Sq. In Cylinder on the Horizontal Clamp).
What equipment configuration detail (#4) is noted in the JLT Clamps #717A-TDC Triple Door Clamp specifications?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: (3) Total Squaring Sections for Clamping and Squaring of Multiple Cabinet Doors.
What further technical highlight (#5) is published for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: Single Lever Valve Air Activation.
What additional shop-floor feature (#6) is documented for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: Faster Changeover with the Cross Clamps Adjusting in a Single Motion.
What supplemental specification (#7) is listed for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp product specifications state: Clamp and Square Multiple Cabinet Doors with Vertical Center Rail - (2) 38 in. x 46 in. Doors Side by Side Double Door Clamping.
Which woodworking shops and production workflows are best suited for the JLT Clamps #717A-TDC Triple Door Clamp?
The JLT Clamps #717A-TDC Triple Door Clamp is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial door, case & frame clamping machine from JLT Clamps (Clamp System, Door Clamps, JLT). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the JLT Clamps #717A-TDC Triple Door Clamp on the Centex Automation storefront?
The JLT Clamps #717A-TDC Triple Door Clamp is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the JLT Clamps #717A-TDC Triple Door Clamp?
Before taking delivery of the JLT Clamps #717A-TDC Triple Door Clamp, verify your shop's clean, dry compressed air supply (PSI and CFM required for pneumatic clamping cylinders or tighteners) and floor space clearance for operator loading and maintenance access.
