Skip to content
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery

JLT | #717A-M Single Miter Door Clamp

by JLT Clamps

Perfect for the Custom Shop – Produce Miter and Stile & Rail Cabinet Doors on one Single Machine

Clamp and Square 100+ Miter Doors Per Day

Features:

  • 26″ x 62″ Maximum capacity.
  • Minimum 9″ Clamping Capacity.
  • Includes (2) Vertical Clamps & (2) Horizontal Clamps.
  • Each clamp includes the JLT Dial Control System for fine adjustments, which is simple and easy to use.
    • This innovative Dial Control System allows for adjustments in BOTH directions while the door is under clamping pressure
  • Precise and Accurate Squaring for both Miter and Stile & Rail Cabinet Doors
  • Precisely Clamp and Square MDF or HDF Doors too!!
  • Easy to use, Single Lever Operation.
  • Fast Changeovers
  • 15 Degree Working Angle

Enhanced Features from the Tried & True #79K Design:

  • Intuitive Trident Pin System allows even Quicker and Easier setup than ever before.
  • Cylinders Located in the back of the machine to Provide Operator with Additional Working Space.
  • Redesigned Jaws with Thumb Plate for Increased Efficiency.
  • Thicker Push Bars Decrease Daily Wear and Tear.

Machine Footprint: 86″L x 50″H x 36″W

Specifications

What is the JLT Clamps #717A-M Single Miter Door Clamp and what primary production role does it serve?
The JLT Clamps #717A-M Single Miter Door Clamp is an industrial door, case & frame clamping machine manufactured by JLT Clamps and supplied by Centex Automation. Clamp and Square 100+ Miter Doors Per Day.

What workpiece capacities and working dimensions are published for the JLT Clamps #717A-M Single Miter Door Clamp?
Published capacity specifications for the JLT Clamps #717A-M Single Miter Door Clamp include: 26 in. x 62 in. Maximum capacity; Minimum 9 in. Clamping Capacity; 38" x 62" max door capacity. Verify that your largest and smallest production parts fall within this envelope before ordering.

What working units, motors, or tooling specifications does the JLT Clamps #717A-M Single Miter Door Clamp feature?
The JLT Clamps #717A-M Single Miter Door Clamp product documentation lists the following working unit and drive specifications: Includes (2) Vertical Clamps and (2) Horizontal Clamps; Each clamp includes the JLT Dial Control System for fine adjustments, which is simple and easy to use. This innovative Dial Control System allows for adjustments in BOTH directions while the door is under clamping pressure; Precisely Clamp and Square MDF or HDF Doors too!!; Cylinders Located in the back of the machine to Provide Operator with Additional Working Space.

What additional design and construction highlight (#1) is specified for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: 26 in. x 62 in. Maximum capacity.

What additional production capability (#2) is listed for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Minimum 9 in. Clamping Capacity.

What mechanical or operational feature (#3) is highlighted on the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Includes (2) Vertical Clamps and (2) Horizontal Clamps.

What equipment configuration detail (#4) is noted in the JLT Clamps #717A-M Single Miter Door Clamp specifications?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Each clamp includes the JLT Dial Control System for fine adjustments, which is simple and easy to use. This innovative Dial Control System allows for adjustments in BOTH directions while the door is under clamping pressure.

What further technical highlight (#5) is published for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Precise and Accurate Squaring for both Miter and Stile and Rail Cabinet Doors.

What additional shop-floor feature (#6) is documented for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Precisely Clamp and Square MDF or HDF Doors too.

What supplemental specification (#7) is listed for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Easy to use, Single Lever Operation.

What additional engineering detail (#8) is noted for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: Fast Changeovers.

What further component detail (#9) is specified for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp product specifications state: 15 Degree Working Angle.

Which woodworking shops and production workflows are best suited for the JLT Clamps #717A-M Single Miter Door Clamp?
The JLT Clamps #717A-M Single Miter Door Clamp is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial door, case & frame clamping machine from JLT Clamps (Clamp System, Door Clamps, JLT). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.

How is pricing handled for the JLT Clamps #717A-M Single Miter Door Clamp on the Centex Automation storefront?
The JLT Clamps #717A-M Single Miter Door Clamp is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.

What facility utility checks should a shop perform before installing the JLT Clamps #717A-M Single Miter Door Clamp?
Before taking delivery of the JLT Clamps #717A-M Single Miter Door Clamp, verify your shop's clean, dry compressed air supply (PSI and CFM required for pneumatic clamping cylinders or tighteners) and floor space clearance for operator loading and maintenance access.

Request a quote

JLT | #717A-M Single Miter Door Clamp

Privacy policy