Skip to content
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery

Giben | NB5J

by Giben

NB5J FEATURES:

Maximize Productivity ◼ Reliable ◼ Versatile

  • A heavy-duty edge bander made for production shops. A solid steel structure along with thick steel plate going from front to back of the machine that the stations mount too. Speeds ranging from 16-20 m/min to produce parts when needed on time.

  • Parts width as small as 30mm, allowing for the widest variety of parts.

  • Stations included on the edge bander are: pre-heat, glue pot, end trimming (rough & fine), buffing, and PC controlled bar code reading diagnostic monitoring system w/ stand-by mode capabilities.

Specifications
Model NB5J
Panel Length ≥ 120 mm
Panel Width ≥ 80 mm
Min. Panel Size 120 x 80 mm
Panel Thickness 10-60 mm
Tape Thickness 0.4-3 mm
Feeding Speed 16/20/24 m/min
Power Supply 380 v; 50Hz
Air Pressure Required 0.7MPa
Operation System 7” Touch screen
Dust Collector Φ 125mm x 4
Total Power 18 Kw
Approx. Weight 5,400 lbs
Overall Dimension 21’ x 4.75’ x 5.4’

What is the Giben NB5J and what primary production role does it serve?
The Giben NB5J is an automatic edgebander manufactured by Giben and supplied by Centex Automation. A heavy-duty edge bander made for production shops.

What workpiece capacities and working dimensions are published for the Giben NB5J?
Published capacity specifications for the Giben NB5J include: Panel Length: 120 mm; Panel Width: 80 mm; Min. Panel Size: 120 x 80 mm; Panel Thickness: 10-60 mm. Verify that your largest and smallest production parts fall within this envelope before ordering.

What working units, motors, or tooling specifications does the Giben NB5J feature?
The Giben NB5J product documentation lists the following working unit and drive specifications: Total Power: 18 Kw; Stations included on the edge bander are: pre-heat, glue pot, end trimming (rough and fine), buffing, and PC controlled bar code reading diagnostic monitoring system w/ stand-by mode capabilities.

How does material feeding, speed, or part transport operate on the Giben NB5J?
For material transport and cycle speed, the Giben NB5J specifications list: Feeding Speed: 16/20/24 m/min; A heavy-duty edge bander made for production shops. A solid steel structure along with thick steel plate going from front to back of the machine that the stations mount too. Speeds ranging from 16-20 m/min to produce parts when needed on time.

What operator control or positioning features are included on the Giben NB5J?
Published control and setup details for the Giben NB5J include: Operation System: 7" Touch screen.

What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Giben NB5J?
Published utility and actuation specifications for the Giben NB5J state: Air Pressure Required: 0.7MPa; Dust Collector: 125mm x 4. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.

What machine construction, table size, footprint, or weight figures are listed for the Giben NB5J?
Regarding machine frame construction, dimensions, and weight, the Giben NB5J listing states: Approx. Weight: 5,400 lbs; Overall Dimension: 21' x 4.75' x 5.4'.

What is the published model specification for the Giben NB5J?
According to the Giben technical specification table for the Giben NB5J, Model is rated at NB5J.

What is the published panel length specification for the Giben NB5J?
According to the Giben technical specification table for the Giben NB5J, Panel Length is rated at 120 mm.

What is the published panel width specification for the Giben NB5J?
According to the Giben technical specification table for the Giben NB5J, Panel Width is rated at 80 mm.

What is the published min. panel size specification for the Giben NB5J?
According to the Giben technical specification table for the Giben NB5J, Min. Panel Size is rated at 120 x 80 mm.

What is the published panel thickness specification for the Giben NB5J?
According to the Giben technical specification table for the Giben NB5J, Panel Thickness is rated at 10-60 mm.

Which woodworking shops and production workflows are best suited for the Giben NB5J?
The Giben NB5J is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an automatic edgebander from Giben (Edgebander, Giben). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.

How is pricing handled for the Giben NB5J on the Centex Automation storefront?
The Giben NB5J is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.

What facility utility checks should a shop perform before installing the Giben NB5J?
Before taking delivery of the Giben NB5J, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.

Request a quote

Giben | NB5J

Privacy policy