EVANS MIDWEST | EM 1050 T-Edge Applicator
The Evans Machinery Model 1050 T-Edge Applicator is a valuable solution for woodworking and laminating operations, specifically engineered for the precise installation of plastic T-molding. Built to create a clean, contoured edge, this machine is well suited for desktops, countertops, doors, drawer fronts, and other flat work surfaces. A variable-speed electric hammer drives the T-molding firmly into place, delivering consistent seating accuracy well beyond what can typically be achieved by hand. The result is improved finish quality, greater efficiency, and reduced operator fatigue—making the Model 1050 an excellent choice for high-volume production environments.
Features:
- 3" Electric Cutoff Blade
- Corner Notching
- Maximum Cut: 1-1/2" Wide
- Minimum Cut: 1/2" Wide
- Hammer Motor: 1/2 HP Variable Speed
- Air Requirement: 100 PSI
- Perfect for the complete application of plastic t-molding
- It produces a smooth contoured edge on desk tops, counter tops, doors, drawer fronts, and other work surfaces
- Plastic t-molding is applied by a variable speed electric hammer that assures ideal seating of the t-molding
- Reduces operator fatigue while maintaining product consistency
Specifications
Evans Midwest EM 1050 T-Edge Applicator FAQs
What is the EM 1050?
A dedicated T-edge applicator.
How is the hammer controlled?
Its speed is variable.
What power does the hammer use?
1/2 HP.
What cutoff blade is fitted?
A 3-inch electric blade.
What powers the cutoff?
A 1/2 HP motor running at 8,000 RPM.
What corner feature is provided?
Pneumatic corner notching.
What is the minimum cut width?
1/2 inch.
What is the maximum cut width?
1-1/2 inches.
What air pressure is specified?
80 PSI.
What electrical supply is described?
110/220V, single-phase, 60Hz. Confirm the selected voltage package.
What is the work height?
36 inches.
What is its footprint?
40 by 50 inches.
What shipping weight is listed?
523 pounds.
How large is the shipping crate?
54 inches long by 41 inches wide by 48 inches high.
How does the PS8900 differ from the EM1050?
PS8900 is a separate automatic panel stacker for the end of laminating lines; EM1050 applies T-edging.
