EVANS MIDWEST | EM 0110 Post Former
Standard Features:
- Overhead radiant heater with vertical locking device and heat deflectors
- Pneumatic controls
- Steel frame with adjustable leveling feet
- Adjustable leaf spacing. (Adjusts for various size build up strips, 1/2" to 1 1/2")
Technical Data and Specifications:
- Electrical: 220/230 V, 1 PH, 14.5 kW, 60 Hz
- Air: 100 PSI, 2 CFM
- Work Height: 35"
- Footprint: 175" L x 26" W x 60" H
Available Options:
- Additional 90 Degree Forming Leaf
Specifications
Evans Midwest EM 0110 Post Former FAQs
What does the EM 0110 form?
Laminate over countertop cores.
Which profiles are recommended?
Bullnose, half bullnose and D-edge profiles.
Can it form an ogee edge?
The OEM says intricate profiles such as ogee are unsuitable.
What is the machine length capacity?
The OEM identifies it as a 12-foot post former.
How is heat supplied?
An overhead radiant heater includes heat deflectors and a vertical locking device.
How are the controls operated?
Pneumatically.
How much build-down adjustment is provided?
The leaf spacing adjusts from 1/2 to 1-1/2 inches.
What frame is supplied?
Steel construction with adjustable leveling feet.
What electrical service is listed?
220/230V, single-phase, 60Hz, 14.5kW.
What air supply is required?
2 CFM at 100 PSI.
What is the work height?
35 inches.
What is the footprint?
175 inches long by 26 inches wide by 60 inches high.
What is the shipping weight?
1,615 pounds.
Is a cove rod standard?
A 1/4-inch cove rod system is listed as an option.
Is HGS317 the same machine as EM0110?
No. The OEM catalog identifies HGS as hot-melt glue spreading equipment with individually heated rolls; EM0110 forms countertops. Confirm the exact HGS317 configuration separately.
