CIRCLE T | EASY Lock Miter LM125
by Circle T
EASY Lock Miter LM125 Details
Our Model LM125 is Uniquely Designed to Produce an extremely PRECISE and EASY LOCK MITER JOINT. Many customers use our machines for face-frame cabinetry, beams, pillar/column wrapping, box newel posts, solid surface, and more!
- A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle!!!
- No more downtime setting up and changing out your shaper!!!
- No more running pieces on their side!!!
- Upgrade to our EASY LOCK MITER LM125
APPLICATION SPECIFICATIONS:
- Maximum Material Thickness: 1.5″
- Minimum Material Thickness: 3/4″
- Minimum Material Width: 1-1/4″
- Minimum Material Width (2-Sided): 2″
- Minimum Material Length: 12″
- Capable of Machining Angles from 90 – 30 Degrees (Finish Angle)
DRIVE PACKAGE SPECIFICATIONS:
- Spindle Motor: 5 HP
- Feed Motor: 0.5 HP
- Spindle Diameter: 1-1/4″
- Spindle Speed: 8,200 RPM
- Variable Speed 11-Roll Positive Grip Feeder
UTILITY REQUIREMENTS:
- Dust Collection Requirements: 670 CFM, 4″ Outlet
- Pneumatic Requirements: 100 PSI .5 CFM
- 25 AMP Disconnect at 480V 3phase
DIMENSION SPECIFICATIONS:
- Table Size: 40″ x 47″
- Footprint: 42″L x 54″W x 60″H
- Shipping Dimensions 57″L x 48″W x 79″H
LM125
SHIPPING WEIGHT: 1400lbs
NET WEIGHT: 1250lbs
Specifications
Circle T EASY Lock Miter LM125 FAQs
What joint does the LM125 machine?
A lock miter joint for applications including cabinetry, beams and column wrapping.
How are the two mating profiles produced?
A single pneumatically tilting spindle cuts the A and B profiles.
What thickness range is specified?
3/4 to 1-1/2 inches.
What is the minimum material width?
2-1/2 inches.
What is the minimum length?
12 inches.
What finished joint angles are listed?
90 to 45 degrees.
What is the spindle motor rating?
7.5 HP.
What is the feed motor rating?
0.75 HP.
What is the spindle diameter?
1-1/4 inches.
What spindle speed is specified?
7,400 RPM.
What feeder is fitted?
A variable-speed, 11-roll positive-grip feeder.
What extraction is specified?
670 CFM through a 4-inch outlet.
What air supply is required?
0.5 CFM at 100 PSI.
How large is the table?
40 by 47 inches.
How does this differ from the other lock-miter model?
LM125 handles thicker material; LM116 is rated for 1/2-1 inch.
