CIRCLE T | EASY Lock Miter LM116
by Circle T
EASY Lock Miter LM116 Details
Our Model LM116 is Uniquely Designed to Produce an extremely PRECISE and EASY LOCK MITER JOINT. Many customers use our machines for face-frame cabinetry, beams, pillar/column wrapping, box newel posts, solid surface, and more!
- A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle!!!
- No more downtime setting up and changing out your shaper!!!
- No more running pieces on their side!!!
- Upgrade to our EASY LOCK MITER LM116
APPLICATION SPECIFICATIONS:
- Maximum Material Thickness: 1″
- Minimum Material Thickness: 1/2″
- Minimum Material Width: 1-1/4″
- Minimum Material Width (2-Sided): 2″
- Minimum Material Length: 12″
- Capable of Machining Angles from 90 – 30 Degrees (Finish Angle)
DRIVE PACKAGE SPECIFICATIONS:
- Spindle Motor: 5 HP
- Feed Motor: 0.5 HP
- Spindle Diameter: 1-1/4″
- Spindle Speed: 8,200 RPM
- Variable Speed 11-Roll Positive Grip Feeder
UTILITY REQUIREMENTS:
- Dust Collection Requirements: 670 CFM, 4″ Outlet
- Pneumatic Requirements: 100 PSI .5 CFM
- 25 AMP Disconnect at 480V 3phase
DIMENSION SPECIFICATIONS:
- Table Size: 40″ x 47″
- Footprint: 42″L x 54″W x 60″H
- Shipping Dimensions 57″L x 48″W x 79″H
LM116
SHIPPING WEIGHT: 1400lbs
NET WEIGHT: 1250lbs
Specifications
Circle T EASY Lock Miter LM116 FAQs
What joint does the LM116 machine?
A lock miter joint for applications including cabinetry, beams and column wrapping.
How are the two mating profiles produced?
A single pneumatically tilting spindle cuts the A and B profiles.
What thickness range is specified?
1/2 to 1 inch.
What is the minimum material width?
1-1/4 inches; two-sided work requires 2 inches.
What is the minimum length?
9 inches.
What finished joint angles are listed?
90 to 30 degrees.
What is the spindle motor rating?
5 HP.
What is the feed motor rating?
0.75 HP.
What is the spindle diameter?
1-1/4 inches.
What spindle speed is specified?
8,200 RPM.
What feeder is fitted?
A variable-speed, 11-roll positive-grip feeder.
What extraction is specified?
670 CFM through a 4-inch outlet.
What air supply is required?
0.5 CFM at 100 PSI.
How large is the table?
40 by 47 inches.
How does this differ from the other lock-miter model?
LM116 handles thinner material; LM125 is rated for 3/4-1-1/2 inches.
