Skip to content
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery
Welcome to Centex Automation, Your Partner For Buying And Selling Industrial Woodwork Machinery

Cameron Automation | #611A- Quick Chop Plus

by Cameron Automation

High Speed, Push Feed, Optimizing Chop System designed for the Rip First AND Chop First Factory

Redesigned from the ground up in 2018, the Quick Chop Plus is a complete and affordable push feed chop saw optimization system. Based off of the time tested #37A- Quick Chop Design and the Powerful “Quick Chop” software platform, The Quick Chop Plus offers many of the same features at more than double the production. The Quick Chop Plus can cut around 30 lineal ft. of material a minute. This totals 13,000+ Lineal Feet per (8) Hour shift.

Like our other Cameron Platforms, the Cameron “Quick Chop” Program is robust and powerful. The Quick Chop’s software runs on a full featured computer – not just a keypad and a PLC. Because the Quick Chop is designed with the custom shop in mind, the software is sophisticated yet easy to use and easy to understand.

The Quick Chop Will:

  • Accurately cut boards to length from cut lists plus or minus .030″. For even closer tolerances the Quick Chop chop saw optimization system offers the option of a lineal encoder for accuracy of +/- .010″.
  • Allow operator to use familiar crayon based defect marking and grading.
  • Increase yield of cut stock and prioritize chop lengths.
  • Make accurate and smooth cuts with a mechanical chop saw.
  • Keep accurate tallies of production and yield.
  • Increase operator safety.
  • Network with office computers to import cut lists from spread sheets and review reports.
  • Print lengths and references on parts with an optional inkjet printer.
  • Wirelessly network with other Quick Chops and the Quick Rip to collectively work on jobs and increase yield.

How it works

Operation of the machine is as follows:

  1. Using a luminescent crayon, the operator marks a board for defects and places the board on the stops. These crayon marks will not appear on the finished material once its been processed.
  2. With the push of a button the chop saw operator can select which cutting bill to use on the board. Unlike the slow ‘paddle’ measuring/defecting technique, the operator does not have to walk from one end of the board to the other to determine the board’s length.
  3. The board is then released, and it drops down to the fence, inside of the Safety Cage. The pusher scans the board for length and the location of the crayon marks as it travels to the end of the board.
  4. The board is then fed into the saw and cut at the optimum positions based on the data entered into the cut list.

As the board is being cut, the operator can mark the next board, place it on the stops and select the next cutting bill, so that it can be scanned immediately the instant the previous board is finished. There is very little wasted time in-between boards, maximizing production of the machine.

Customers who will benefit from the Quick Chop:

  • Small to medium sized shops.
  • Those who currently have operators using manually operated chop saws.
  • Manufacturers of high quality wood products.
  • Door and Face Frame Manufacturers
  • Stair and Tread Manufacturers
  • Furniture Component Manufacturers

Advantages

Advantages over Hand Chopping:

  • Increases yield of cut stock
  • Higher production
  • Tallies Material Automatically
  • Better consistency in Chop Lengths

Advantages over Other Systems:

  • Simple and quick Luminescence crayon marking is used for defects or grading
  • Unique design enables operator to be marking two or more boards ahead of the board being chopped. This equals higher productivity.
  • Higher yield through grade sharing
  • Accuracy within +/- 0.010
  • Quick Chop uses a full featured computer system, not just a keypad
  • Pneumatic saw actuator is fast and delivers a smooth operation cycle for accurate and quality cuts.
  • Welded one-piece steel frame allows the Quick Chop to ship set up. Installs in one afternoon

Specifications

  • Power Requirements (3 Phase Required)
    • 220V = 30 Amps
    • 480V = 15 Amps
  • Air Requirements
    • 1/4″ Airline = 5 SCFM @ 90 psi
  • Saw Blade Cutting Capacities
    • 14″ Diameter / 1″ Bore
      • 4/4 Material = 8.5″ Wide
      • 8/4 Material = 7″ Wide
    • 18″ Diameter / 1″ Bore
      • 4/4 Material = 13″ Wide
      • 16/4 Material = 10″ Wide
  • Saw Arbor Motor
    • 7.5 Hp
  • Max Material Length Capacity
    • Offered in 12, 16, 20, and 24 ft Length Options
  • Dust Collection
    • 1 x 4″ Dust Port
    • 400 CFM Required
Specifications

What is the Cameron Automation #611A- Quick Chop Plus and what primary production role does it serve?
The Cameron Automation #611A- Quick Chop Plus is an optimizing & cut-off saw system manufactured by Cameron Automation and supplied by Centex Automation. Redesigned from the ground up in 2018, the Quick Chop Plus is a complete and affordable push feed chop saw optimization system.

What workpiece capacities and working dimensions are published for the Cameron Automation #611A- Quick Chop Plus?
Published capacity specifications for the Cameron Automation #611A- Quick Chop Plus include: Accurately cut boards to length from cut lists plus or minus .030 in.. For even closer tolerances the Quick Chop chop saw optimization system offers the option of a lineal encoder for accuracy of +/- .010 in; Increase yield of cut stock and prioritize chop lengths; Print lengths and references on parts with an optional inkjet printer; With the push of a button the chop saw operator can select which cutting bill to use on the board. Unlike the slow 'paddle' measuring/defecting technique, the operator does not have to walk from one end of the board to the other to determine the board's length. Verify that your largest and smallest production parts fall within this envelope before ordering.

What working units, motors, or tooling specifications does the Cameron Automation #611A- Quick Chop Plus feature?
The Cameron Automation #611A- Quick Chop Plus product documentation lists the following working unit and drive specifications: Unique design enables operator to be marking two or more boards ahead of the board being chopped. This equals higher productivity; Saw Blade Cutting Capacities 14 in. Diameter / 1 in. Bore 4/4 Material = 8.5 in. Wide; Saw Arbor Motor 7.5 Hp.

What operator control or positioning features are included on the Cameron Automation #611A- Quick Chop Plus?
Published control and setup details for the Cameron Automation #611A- Quick Chop Plus include: Tallies Material Automatically.

What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Cameron Automation #611A- Quick Chop Plus?
Published utility and actuation specifications for the Cameron Automation #611A- Quick Chop Plus state: Stair and Tread Manufacturers; Pneumatic saw actuator is fast and delivers a smooth operation cycle for accurate and quality cuts; Power Requirements (3 Phase Required) 220V = 30 Amps; 480V = 15 Amps. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.

What machine construction, table size, footprint, or weight figures are listed for the Cameron Automation #611A- Quick Chop Plus?
Regarding machine frame construction, dimensions, and weight, the Cameron Automation #611A- Quick Chop Plus listing states: Door and Face Frame Manufacturers; Welded one-piece steel frame allows the Quick Chop to ship set up. Installs in one afternoon.

What additional design and construction highlight (#1) is specified for the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Accurately cut boards to length from cut lists plus or minus .030 in.. For even closer tolerances the Quick Chop chop saw optimization system offers the option of a lineal encoder for accuracy of +/- .010 in.

What additional production capability (#2) is listed for the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Allow operator to use familiar crayon based defect marking and grading.

What mechanical or operational feature (#3) is highlighted on the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Increase yield of cut stock and prioritize chop lengths.

What equipment configuration detail (#4) is noted in the Cameron Automation #611A- Quick Chop Plus specifications?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Make accurate and smooth cuts with a mechanical chop saw.

What further technical highlight (#5) is published for the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Keep accurate tallies of production and yield.

What additional shop-floor feature (#6) is documented for the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus product specifications state: Increase operator safety.

Which woodworking shops and production workflows are best suited for the Cameron Automation #611A- Quick Chop Plus?
The Cameron Automation #611A- Quick Chop Plus is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an optimizing & cut-off saw system from Cameron Automation (Cameron Automation, Chop Optimization, Chop Saw). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.

How is pricing handled for the Cameron Automation #611A- Quick Chop Plus on the Centex Automation storefront?
The Cameron Automation #611A- Quick Chop Plus is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.

What facility utility checks should a shop perform before installing the Cameron Automation #611A- Quick Chop Plus?
Before taking delivery of the Cameron Automation #611A- Quick Chop Plus, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.

Request a quote

Cameron Automation | #611A- Quick Chop Plus

Privacy policy