Cameron Automation | #411A- Skew Rip System
Designed for Small and Medium Shops looking for High Efficiency and Throughput
The Skew is a highly efficient, inexpensive, full featured, rip optimization system designed to fit any 12″ wide gang rip saw and specifically developed for the custom shop. The unique feature of The Skew is the “skewing fence”. It has the ability to twist and feed the board into the saw to get the best yield. The Skew also has all the features of the high-end optimization systems like: lumber tallying, pack reporting, bundle reporting, yield calculations, simulations, and much more. The greatest benefit of The Skew is the Return on Investment, which can be well under 1 year.
Typical Skew Rip System Customers:
- Molding & Millwork Shops
- Cabinet Shops
- Flooring Manufacturer
- Wholesale Lumber Distributor
- Door Manufacturer
- Stair & Railing Manufacturer
Many Skew Systems include a Cameron (2) or (3) Moving Blade Rip Saw, but with our Cameron Opti-Rip Software, we are able to communicate with Moving Blade Saws from other Manufacturers: Mereen-Johnson, Raiman, Cantek, and Kentwood to name a few.
Cameron Automation has pushed the envelope once again to simplify sophisticated equipment and bring it to the small shop to increase yield and save labor.
How it Works:
- A Board is placed on the Infeed Section
- The system measures the width, length, and shape of the board using sensors placed at 1’ increments
- With our unique “Skewing Fence”, the machine adjusts the angle and position of each board to achieve the highest possible yield
- The laser lights move with the saw blades to project the rip solution on the board
- The operator has several options available to improve the final rip solution. Once that is determined, the board is processed into the saw and the next board is measured
- The Cameron Software Actively Tallies all Production, constantly updating a number of reports that can be saved.
This System Features:
- Full Optimizing Infeed
- 12″ Wide Arbor, (2) Moving and Multiple Fixed Blade Rip Saw
- Auto-Skew to Increase Board Yield
- Fully Integrated Software Package
- Automatic Movable Blade Positioning by the Cameron Software
The Skew is our answer for Rip Optimization in a custom shop. It will quickly transform a labor intensive hand fed rip work cell, into an efficient and effective. Cameron has further refined their rip software to make it easy and affordable for the small shop.
Advantages
Cameron Rip Software:
- Yield Improvement over Hand feeding
- Increased Safety for Operator
- Full Production Tracking that includes:
- Production Tallies
- Rough Lumber tracking by length and Yield
- Arbor Optimization (mainly used with large fixed arbor saws)
- Bundle reports on packs of lumber
- Simulation capabilities to simulate jobs before the wood ever hits the infeed
- Product Value Decisions: software can choose rip widths based on which rips are more profitable for your company.
Benefits of a Cameron Rip System:
- Award winning support.
- Software for both the Infeed and Gang Saw is written in house in Poughkeepsie, NY
- Industry leading features with the Auto-Skew and Over/Under design.
- Powerful Software to help improve your business and make you more profitable.
- Significant Yield Increases that go directly to the Bottom Line by decreasing Lumber Bills and Improving Productivity
Specifications
Cameron Skew Infeed
- Lumber Capacities
- Standard Machine: 5 Ft. Minimum / 16 Ft. Maximum
- Short Stock Machine: 28″ Minimum / 16 Ft. Maximum
- Thickness Tolerances
- 12″ Saw Blades: 2.5″
- 14″ Saw Blades: 3.75″
- Maximum Width (Incoming Material)
- 15″ Wide
Cameron #413A- Rip Saw
- (2) Servo Controlled Movable Blades
- Multiple Fixed Blades
- Pocket Sizes between Saw Blades
- Between (2) Fixed Blades: 1″
- Between Fixed Blade and 1st Movable Blade: 1″
- Between (2) Movable Blades: 1.875″
- Feed Speed
- Minimum: 26 ft/min (8 m/min)
- Maximum: 130 ft/min (40 m/min)
- Electric Motors:
- Arbor Motor: 50 Hp
- Feed Motor: 3 Hp
- Three (3) sets of anti-kickback fingers
- (4) individual Pneumatic pressure rolls
- Steel dip chain construction with urethane inserts
- Powered out-feed roller
- Digital controlled lubricator for feed chain.
- Amp meter for monitoring arbor motor running amperage
- Easily accessed v-belt driving saw arbor for reduced vibration and higher tolerances
- Easy access to spindle and blades for maintenance and tooling changes
Specifications
What is the Cameron Automation #411A- Skew Rip System and what primary production role does it serve?
The Cameron Automation #411A- Skew Rip System is an industrial rip & table saw manufactured by Cameron Automation and supplied by Centex Automation. The Skew is a highly efficient, inexpensive, full featured, rip optimization system designed to fit any 12 in.
What workpiece capacities and working dimensions are published for the Cameron Automation #411A- Skew Rip System?
Published capacity specifications for the Cameron Automation #411A- Skew Rip System include: Product Value Decisions: software can choose rip widths based on which rips are more profitable for your company; Thickness Tolerances 12 in. Saw Blades: 2.5 in; The system measures the width, length, and shape of the board using sensors placed at 1' increments; Rough Lumber tracking by length and Yield. Verify that your largest and smallest production parts fall within this envelope before ordering.
What working units, motors, or tooling specifications does the Cameron Automation #411A- Skew Rip System feature?
The Cameron Automation #411A- Skew Rip System product documentation lists the following working unit and drive specifications: 14 in. Saw Blades: 3.75 in; Between Fixed Blade and 1st Movable Blade: 1 in; Between (2) Movable Blades: 1.875 in; Electric Motors: Arbor Motor: 50 Hp.
How does material feeding, speed, or part transport operate on the Cameron Automation #411A- Skew Rip System?
For material transport and cycle speed, the Cameron Automation #411A- Skew Rip System specifications list: Feed Speed Minimum: 26 ft/min (8 m/min); Maximum: 130 ft/min (40 m/min); A Board is placed on the Infeed Section.
What operator control or positioning features are included on the Cameron Automation #411A- Skew Rip System?
Published control and setup details for the Cameron Automation #411A- Skew Rip System include: Full Production Tracking that includes: Production Tallies.
What shop utility, pneumatic, hydraulic, or dust extraction details are listed for the Cameron Automation #411A- Skew Rip System?
Published utility and actuation specifications for the Cameron Automation #411A- Skew Rip System state: Stair and Railing Manufacturer; Industry leading features with the Auto-Skew and Over/Under design; (4) individual Pneumatic pressure rolls. Confirm exact plant voltage, phase, air supply, and dust collection CFM requirements with Centex Automation prior to installation.
What machine construction, table size, footprint, or weight figures are listed for the Cameron Automation #411A- Skew Rip System?
Regarding machine frame construction, dimensions, and weight, the Cameron Automation #411A- Skew Rip System listing states: Powerful Software to help improve your business and make you more profitable.
What standard or optional equipment configurations are noted for the Cameron Automation #411A- Skew Rip System?
The Cameron Automation #411A- Skew Rip System listing notes the following equipment and configuration details: Lumber Capacities Standard Machine: 5 Ft. Minimum / 16 Ft. Maximum; The operator has several options available to improve the final rip solution. Once that is determined, the board is processed into the saw and the next board is measured. Request a formal equipment quote from Centex Automation to confirm which options match your shop workflow.
What is the published full production tracking that includes specification for the Cameron Automation #411A- Skew Rip System?
According to the Cameron Automation technical specification table for the Cameron Automation #411A- Skew Rip System, Full Production Tracking that includes is rated at Production Tallies.
What is the published product value decisions specification for the Cameron Automation #411A- Skew Rip System?
According to the Cameron Automation technical specification table for the Cameron Automation #411A- Skew Rip System, Product Value Decisions is rated at software can choose rip widths based on which rips are more profitable for your company.
What is the published lumber capacities standard machine specification for the Cameron Automation #411A- Skew Rip System?
According to the Cameron Automation technical specification table for the Cameron Automation #411A- Skew Rip System, Lumber Capacities Standard Machine is rated at 5 Ft. Minimum / 16 Ft. Maximum.
What is the published short stock machine specification for the Cameron Automation #411A- Skew Rip System?
According to the Cameron Automation technical specification table for the Cameron Automation #411A- Skew Rip System, Short Stock Machine is rated at 28 in. Minimum / 16 Ft. Maximum.
Which woodworking shops and production workflows are best suited for the Cameron Automation #411A- Skew Rip System?
The Cameron Automation #411A- Skew Rip System is engineered for industrial woodworking, cabinet manufacturing, millwork, and panel or solid-wood processing shops seeking an industrial rip & table saw from Cameron Automation (Cameron Automation, Rip System, Ripsaw). Share your part dimensions, material types, and daily throughput targets with Centex Automation to verify model fit.
How is pricing handled for the Cameron Automation #411A- Skew Rip System on the Centex Automation storefront?
The Cameron Automation #411A- Skew Rip System is capital woodworking machinery offered on a Request-a-Quote (RFQ) basis rather than instant web checkout. Submit a quote request on the product page so Centex Automation can provide current equipment pricing, factory configuration options, and freight estimates.
What facility utility checks should a shop perform before installing the Cameron Automation #411A- Skew Rip System?
Before taking delivery of the Cameron Automation #411A- Skew Rip System, verify your shop's electrical voltage, phase, and amperage service, compressed air pressure and dry CFM supply (where pneumatic actuators are used), dust extraction port diameters and required CFM (for chip-producing machines), and floor space clearance for operator loading and maintenance access.
