Pillar Machine

The 2S is a multi-axis, mulit-function CNC horizonal machine. It is designed to size edge glued panels safely and accurately. This raised panel doo...

The BOA-M is a manually operated Case Clamp designed to clamp cabinet boxes, drawer boxes and case goods that have been doweled together. The dowel...

The BOA-S is a servo-assisted manually operated Case Clamp designed to clamp cabinet boxes, drawer boxes and case goods that have been doweled toge...

The CMJ is a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip brea...

The CMJ-HSK is a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip ...

The CXEP double sided woodworking CNC machine is designed and configured for the high production of cabinet end panels. Due to our CNC “Walking Bea...

The CXT machine series is designed to produce four tenons with each cycle. Two parts are machined at once with production rates in excess of twenty...

The H49 is a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC...

The HMJ is a CNC machining center used for producing high quality haunch joints, which are used in many furniture and cabinet applications. The hau...

The HP5D is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or therm...

The HPJ 48 is a Vertical and Horizontal Boring machine and Dowel insertion CNC machining center used for case construction in cabinet and/or furnit...

The HPJ 96 is a Horizontal Bore and Dowel insertion CNC machining center used for case construction in cabinet and/or furniture manufacturing, good...

The HPJ-L is a horizontal CNC machining center that drills the pocket for Lamello’s P-System. This is used for glueless and clampless case construc...

The HPJV 48 is a Horizontal and Vertical Bore and Dowel insertion CNC machining center used for case construction in cabinet and/or furniture manuf...

The HPLD is a horizontal point to point Lockdowel inserting machine and one of the finest line boring machines for cabinets available. This machine...

The HPM machine has CNC controlled spindles for mortising and drilling. This machine is equipped with multiple heads on individual carriages, which...

The HPMT has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spind...

The HPMT-96 is an ideal general utility CNC mortise and tenon machining center. This machine has a full 3 Axis CNC control and can be configured fo...

The key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, and a little patience and unders...

The Model 220 Profile Sander is a two spindle machine designed for use with flexible brush type sanding wheels. The spindles are counter-rotating, ...

The Model 230 Profile Sander is a two spindle machine designed for use with flexible brush type sanding wheels. The machine is on caster and can be...

The Model 260 Profile Sander is a horizontal spindle machine designed for use with flexible brush type sanding wheels. Standard spindles are 600mm ...

In order to optimize profile sanding, most profiles should have the wheel tilted to minimize the depth the profile goes into the wheel, and to keep...

The Model 390 Automatic Shaper is a different concept in shapers. This shaper is conveyor fed, making it ideal for shaping small parts which could ...