T-Tool Catalog

ISO20 ER20 Toolholder fitted with ER20 Mini Nut and Colombo ISO20 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-13mm tool sizes.

ISO20 ER20 Toolholder fitted with ER20 Mini Nut. Balanced to 40,000rpm @G2.5. Fits 1-13mm tool sizes.

ISO30 ER32 Toolholder, A=50mm LH Threaded Nut. Commonly used on many ISO30 HSD Electrospindle equipped CNC routers. Balanced to 24,000 rpm @ G2.5, ...

ISO/BT30 ER32 Toolholder for Thermwood CNC Router with HSD spindle motor, A=55mm. Balanced to 24,000 rpm @ G2.5, includes HSD pullstud and ER32 col...

ISO30 Drill Chuck 1- 13mm (1/2") shank capacity, A=107mm, includes key. Balanced to 24,000rpm @ G2.5 One piece design for optimal rigidity and safe...

ISO15 ERSW11 Toolholder fitted with ER11 Hex Nut and ISO15 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-7mm tool sizes.

ISO15 ERM11 Toolholder fitted with ER11 Mini Nut and ISO15 pullstud. Balanced to 40,000rpm @G2.5. Fits 1-7mm tool sizes.

This easy to mount tightening fixture is specifically designed for the HSD ISO 30 toolholders with the "Biesse" flats. Made out of solid aluminum w...

ISO20 ER16 Toolholder fitted with ER16 Mini Nut. A=51, Balanced to 40,000rpm @G2.5

ISO20 ER16 Toolholder fitted with ER16 Mini Nut. A=51, Balanced to 40,000rpm @G2.5 For use with ELTE spindles only

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 50mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 50mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

HSK 63F OZ25 Toolholder complete with collet nut, A=80mm. Balanced to 24,000 rpm @ G2.5, includes powercoat nut

HSK Spindle Taper Cleaner for HSK-A/C/E 50 and HSK-63F spindle tapers. A must to keep the spindle taper clean of debris for optimal toolholder cont...

HSK-63F Sawblade Holder. 110mm diameter mounting surface with 120mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting har...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 1200mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting har...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 40mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hardw...

HSK-63F Sawblade Holder. 85mm diameter mounting surface with 100mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hard...

HSK-63F Sawblade Holder. 110mm diameter mounting surface with 65mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting hard...

85mm Diameter outer safety flange for sawblade holder. Comes with mounting hardware. Complete sawblade holder shown for illustration purposes only.

HSK-63F Sawblade Holder. 110mm diameter mounting surface with 100mm gauge length out of spindle. Includes 30mm ID adapter and sawblade mounting har...

110mm Diameter outer safety flange for sawblade holder. Comes with mounting hardware. Complete sawblade holder shown for illustration purposes only.

HSK-63F SYOZ25 Toolholder for Thermwood CNC complete with collet nut, A=80mm. Balanced to 24,000 rpm @ G2.5, for up to 1" SYOZ25 collets. Special s...

HSK 63F OZ25 Toolholder complete with collet nut, A=80mm. Left Hand Threaded Nut, Balanced to 24,000 rpm @ G2.5, includes OZ25 collet nut. Anderson...