OMAKSAN HOLEMASTER | 4000 X Line 6X Faster

Double the Units, Double the Output

The Holemaster 4000 X Line 6X Faster is Omaksan's entry into six-sided processing. The 1+1 configuration adds a bottom drilling unit below the workpiece, working simultaneously with the top unit.

The result is all six sides of the panel drilled in one pass, with no operator flipping, no second setup, and no consistency variance from manual handling.

Overview

The Entry Point to Six-Sided Automated Drilling

The 4000 X Line 6X Faster is the first model in the Holemaster lineup with a 1+1 drill block configuration, adding a second drilling unit positioned below the workpiece. The top unit, with 8 vertical drills, 6 horizontal drills, and 1 saw blade, processes the top face and edges while the bottom unit, with 10 vertical drills, handles the underside in the same pass.

For cabinet manufacturers running Confirmat hardware, modular furniture producers with consistent bottom-face drilling needs, and any shop where operator time spent flipping panels has become a production bottleneck, the X Line 6X Faster removes the manual flip entirely.

A panel enters the machine once and exits drilled on all six sides, ready for assembly or finishing.

The dual-direction milling capability also expands what the machine can do, including simultaneous grooving on top and bottom surfaces, custom routing operations, and shaped cuts on both faces. The 4 kW milling unit handles heavier operations without slowing down.

The 4000 X Line 6X Faster is Right For You If…

• You regularly drill bottom-face hardware, including Confirmat or dowels from below
• Operator time spent flipping panels is slowing your production
• You want consistent results regardless of operator handling
• Your production volume justifies six-sided processing as the standard workflow
• You do not need an automatic tool changer, saving cost compared with the Smart 6X Faster

Features & Options

Standard Equipment and Available Options

The 4000 X Line 6X Faster ships with both upper and lower drilling units as standard. This 1+1 configuration processes all six sides in a single pass. Automatic tool measurement and safety mat are also standard. Optional upgrades add ERP integration.

Standard Features

• Omaksan Works control software
• 3-axis servo-driven drilling heads for top and bottom processing
• Upper unit: 8 vertical drilling spindles
• Upper unit: 6 horizontal drilling spindles
• Upper unit: 1 saw blade for grooving
• Lower unit: 10 vertical drilling spindles
• Dual-direction milling motors for top and bottom operations
• 4 kW milling unit motor
• Automatic tool measurement to eliminate manual tool offset entries
• Safety mat with pressure-sensitive auto pause/resume
• Hardware compatibility: Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat
• Unlimited panel length on the X-axis for both units
• Upper Y-axis: 1300 mm maximum panel width
• Lower Y-axis: 1150 mm maximum panel width
• Standard Z-axis: 40 mm, with 60 mm optional
• All six sides drilled in a single pass with no operator flip

Available Options

• Z-axis extension from 40 mm to 60 mm
• Barcode reader for production integration with ERP and design software

Technical Specifications