Northtech

Northtech Overarm Pin Routers are designed with a heavy cast iron body and steel base to eliminate chatter flex. The NT-555 Overarm Pin Router has ...

Northtech Overarm Pin Routers are designed with a heavy cast iron body and steel base to eliminate chatter flex. The NT-750 Overarm Pin Router has ...

The NT RM60-2SS rod milling machine is designed to take square stock to round stock. Unlike a traditional moulder, the round rod machine is designe...

Round Rod Machines are used to process square stock into round rods. The NT-RM80 is a single head Round Rod Machine with a working range of just un...

NT-60RM ROD MILLING Round Rod Machines are used to process square stock into round rods. The NT-RM60 is a single head Round Rod Machine with a work...

Northtech Double End Tenoners are built for multishift applications. Cast iron frames and arms paired with unsurpassed processing capability make t...

The Northtech MBS8-2B2T is a high production (2)top and (2) bottom head sander. The 8″ working with and hopper feed make it an ideal solution for n...

MACHINE HP: 5.5 HP. DIRECT DRIVE (MOTOR): Sanding Heads VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 16.5/8.25 Amps CONFI...

MACHINE HP: 4 HP DIRECT DRIVE (MOTOR): Sanding Heads VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 12/6 Amps CONFIGURATION...

The NT S5230 is a compact heavy duty 5 head moulder with large moulder capacity . The 6″ x 9″ capacity moulder with a 5 head double bottom configur...

The NT N6230 is quite possibly the best valued moulder available. The 6″ x 9″ capacity moulder with a standard 6 head configuration provides limitl...

The NT N2230 is a specially designed 6″ x 9″ moulder. This 2 spindle machine is configured with a single top and bottom horizontal spindle. The eli...

The NT A4230-H is a 4 head high speed moulder. The single head per side configuration can be equipped with hydro locking helical heads and high HP ...

NT-A4230-H320 MOULDER 4 HEAD The NT A4230-H is a 4 head 320fpm high speed moulder. The single head per side configuration can be equipped with head...

NT-N4230 MOULDER 4 HEAD The NT N4230 is our standard 4 head N series machine. The 6″ x 9″ capacity moulder with a standard 4 head configuration pro...

The NT N6230 is quite possibly the best valued moulder available. The 6″ x 9″ capacity moulder with a standard 6 head configuration provides limitl...

The NT S4230-1 is a compact heavy duty 4 head moulder with large moulder capacity and a digitally positioned outside spindle for fast width changes...

The NT-DMS14-AS is our double miter saw designed for aluminum. The (2) 14″ blades cycle are individually powered and cycle together for smooth cutt...

The NT-PN14 is a double blade saw designed to cut an adjustable 90 degree notch. The (2) 5HP 14″ blades power through up to 8″ of material with ove...

The Northtech NT HWG50-HD is a horizontal wood grinder with a tilted infeed. There is a hard polymer friction resistant slide with over 4″x25″openi...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: .1 Amps FEED SYSTEM: 53-1/2'' Air Cylinder DRIVE SYSTEM: PLC FEED SPEED RANG...

The NT-J20 Jointer has a 20″ working width, 10HP and over 100″ infeed and outfeed table for a smooth and flat surface making them ideal for gluing ...

The NT-J12 Jointer has a 12″ working width and long infeed and outfeed table for a smooth and flat surface making them ideal for gluing surface pre...

The NT-J16 Jointer has a 16″ working width, 10HP and over 88″ of infeed and outfeed table for a smooth and flat surface making them ideal for gluin...