Northtech Sanders

While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 10 series machines are designed for industrial prod...

While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, 10 series machines are designed for industrial producti...

The NT-8-1300RC is two head wide belt sander that has a 51″ working width and comes standard with 52″ x 75″ belts and variable speed invisible seam...

The NT-1300C single combination head wide belt sander has a 51″ working width and comes standard with 52″ x 75″ belt and variable speed invisible s...

MACHINE HP: 32-1/4'' VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 39.5 / 79 Amps CONFIGURATION: Roller Combination 1st HE...

The NT-1100C single combination head wide belt sander has a 43″ working width and comes standard with 44″ x 75″ belt and variable speed invisible s...

The NT-900C single combination head wide belt sander has a 36″ working width and comes standard with 37″ x 75″ belt and variable speed invisible se...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 274 / 137 Amps CONFIGURATION: Roller Roller Combination 1st HEAD: 40 HP 12''...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 72 / 144 Amps CONFIGURATION: Roller Combination 1st HEAD: 30 HP 12'' Spiral ...

The NT-900C single combination head wide belt sander has a 36″ working width and comes standard with 37″ x 75″ belt and variable speed invisible se...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 72 / 144 Amps CONFIGURATION: Roller Combination 1st HEAD: 30 HP 12'' Spiral ...

NT-12-1300R WIDE BELT SANDER While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 12series machines are ...

MAIN MOTOR HP: 15 HP VOLTAGE, FREQUENCY: 230/460 Volt 60Hz PHASE: 3 Phase AMP REQUIREMENT: 17/35 Amps FEED HP: Pneumatic Feed Cylinder FEED SYSTEM:...

The NT-RRS80B is a single head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the pa...

The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the part...

The Northtech MBS8-2B2T is a high production (2)top and (2) bottom head sander. The 8″ working with and hopper feed make it an ideal solution for n...

MACHINE HP: 5.5 HP. DIRECT DRIVE (MOTOR): Sanding Heads VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 16.5/8.25 Amps CONFI...

MACHINE HP: 4 HP DIRECT DRIVE (MOTOR): Sanding Heads VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 12/6 Amps CONFIGURATION...

MACHINE HP: 1.25 HP PHASE: 3 Phase AMP REQUIREMENT: 4/2 Amps FEED HP: .25 HP FEED SYSTEM: (2) 3'' x 3'' Rubber Wheels DRIVE SYSTEM: .25 Hp. Motor t...

Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with that has ...

Northtech edge sanders are built for the industrial use. The NT-ES636DE is our most compact edge sander with that has a 6″x36″ sanding area on both...

MACHINE HP: 10 HP DIRECT DRIVE (MOTOR): Motor to 7'' x 13'' Pulley VOLTAGE, FREQUENCY: 230/460 Volt 60Hz PHASE: 3 Phase AMP REQUIREMENT: 30/15 Amps...

Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with that has ...

Northtech offers one of the largest selection of heavy duty industrial grade edge sanders. The NT-ES1648D is our largest capacity edge sander with ...