Lamello

The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary - the machining happ...

The biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete solution. The success of the b...

#20(500); #10(250); #0(250) The biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete so...

The biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete solution. The success of the b...

This starter set includes: 80 Pairs Divario connectors Installation tool Metal Marking Jig Drill bit & stop collar Systainer

80 pairs Clamex P-14 80 pairs Tenso P-14 incl. clip 60 pairs Clamex P-Medius 14/10 20 pieces Bisco P-14 Tenso P-10/P-14 Preload tool Systainer T-L...

P-System CNC shaft tool cutter, solid carbide, shaft ø 12x40, L=80 mm The P-System connecting fittings can be installed either with the Zeta P2 pow...

P-System CNC drill 6 mm, L=100 mm The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The ...

P-System CNC cutter arbors. Please specify shaft

The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine. The use on a CNC machine requires the ...

Fitting Tool, P-Mounting, 4 mm x 30 mm Hexoganal Screwdriver, 290 mm Length, For All Angles, Fast and Flexible

Lamello Spiral drill bit Ø 6mm with centering point for the Clamex P-10 and P-14 systems.

Lamello 125344 Drill Guide Clamex P14/P15 P10 with Spiral Drill, 22.5 ° – 180 ° Box contents: includes twist drill bit diameter: 6 mm Coverage ang...

Features Long Lasting P-System Diamond Groove Cutter for the Lamello Zeta P2. You can produce Lamello P System grooves more effectively and faster...

Carbide cutter for Lamello P-System

Depth stop 4 mm for Tenso P-10 for P-8 grooves

The Lamello preload insertion tool aids in the correct placing of the Tenso pre-load clips into the Tenso connector

The Tenso P-14 is a self-clamping connector with three functions: alignment, clamping and connecting. The very high level of clamping force allows ...

The Clamex cover caps serve to cover the Clamex P drill holes. They are available for 90 degree joints as well as 45 degree joints. There are eleve...

The Clamex cover caps serve to cover the Clamex P drill holes. They are available for 90 degree joints as well as 45 degree joints. There are eleve...

Positioning Clip for Zeta P Used for positioning in the Clamex 6mm Access Hole

Positioning Pins for Zeta P2 For positioning in holes with a diameter of either Ø 5mm or 8mm

Lamello Divario P-18 installation tool With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, th...

The 125510 Divario P-18 Marking Jig includes: Metal marking jig 8mm drill bit