Lamello | Clamex P Medius 14/10
Clamex P Medius complements the Clamex P-14 connectors for use in shelving units where two shelves meet the dividing panel at the same height. Medius consists of two parts with different installation depths. The lever part is installed in the shelf, anchored in a 14 mm deep P-System groove. Thanks to its installation depth of just 10 mm and crescent-shaped cut out, the second part can be fitted back-to-back in a dividing panel measuring just 16 mm (5/8") in thickness.
The form-locking P-System enables secure installation in the workpiece without the need for tools in just seconds. Clamex P does not require glue or screws, and thus offers numerous benefits in the manufacturing process while also distinguishing itself from standard connecting hardware.
Zeta P2 depth setting 14 and 10.
Benefits of Clamex P Medius 14/10
- Practically wear-free knock down fitting
- Same positioning of P-System grooves on both sides possible for dividing panels with a minimum thickness of 16 mm (5/8")
- Minimal tool opening of just 6 mm
- Fast, tool-free installation of connectors
- Stackable for transport, with connectors pre-installed
- Lateral tolerance for efficient installation with the Zeta P2 biscuit joiner or a CNC machine
Applications
- Dividing panel connection of shelf units where two shelves meet the dividing panel at the same height. This removes the need to offset the cutting position on dividing walls and reduces potential errors
- Surface installation in material thicknesses of 12 mm since one half of the connector is anchored just 10 mm deep
- Knock down fitting for furniture, shelf units, fitted wardrobes, kitchen manufacturing etc.
- Connecting fitting for detachable elements in shop fitting and trade show construction
- Powerful alternative to standard connecting fittings
- Rapid prototype construction before starting a new furniture range
- On-site adjustments and assembly
Specifications
Size: 66 × 27 × 9.7 mm • 52 × 7.5 × 9.7 mm
Cutter: Ø 100.4 × 7 × 22
Shell material: Fiberglass reinforced plastic
Lever material: Zinc die cast
Installation tolerance: Longitudinal ± 1 mm
Tensile strength:
Particle board: ~ 700 N ≈ 70 kg
Beech: ~ 900 N ≈ 90 kg
Specifications
What is Lamello | Clamex P Medius 14/10?
Lamello | Clamex P Medius 14/10 complements Clamex P-14 for shelving where two shelves meet a dividing panel at the same height. It has two parts with different installation depths.
What installation depths are listed?
The lever part anchors in a 14 mm deep P-System groove; the second part has 10 mm installation depth for back-to-back fit in a dividing panel as thin as 16 mm (5/8 inch).
What Zeta P2 depth settings are listed?
Zeta P2 depth setting 14 and 10.
What tool opening is listed?
Minimal tool opening of just 6 mm is listed.
Does it need glue or screws?
No. Clamex P does not require glue or screws; form-locking P-System enables secure tool-free installation in seconds.
What sizes are listed?
About 66 x 27 x 9.7 mm and about 52 x 7.5 x 9.7 mm; cutter about 100.4 x 7 x 22.
What materials are listed?
Shell fiberglass reinforced plastic; lever zinc die cast.
What tensile strengths are listed?
Particle board about 700 N / 70 kg; beech about 900 N / 90 kg.
How do I get pricing?
Contact Centex Automation for current price, freight, and lead time, or use live storefront pricing when shown.
What brand support applies?
Centex Automation - Built by People Who Know the Shop Floor - helps shops select Lamello connectors and accessories.
Is install training included?
Clamex P Medius setup, training, or service may be available; do not assume they are included. Ask Centex Automation.
What applications are listed?
Dividing-panel shelf connections, surface install where one half is only 10 mm deep (material from 12 mm theme), knock-down furniture, shop fitting, prototype, and on-site assembly are listed.
What should I confirm before ordering?
Confirm Medius 14/10 vs standard Clamex P-14/P-10, dividing-panel thickness, and Zeta P2 or CNC P-System capability.
Can connectors be pre-installed for transport?
Yes. Stackable for transport with connectors pre-installed is listed.
How do I contact Centex Automation?
Use the storefront contact path or your Centex Automation sales contact for selection help, price, and lead time.