Lamello | Clamex S-18
Clamex S is a knock down connector that is screwed into an 8 mm groove and connected via a lever. The 8 mm groove cutter for Clamex S can be used with any Lamello biscuit joiner.
Clamex S possesses a minimal installation depth of 14.7 mm and can therefore be used in all wood materials from 16 mm.
Benefits
- Practically wear-free knock down connector
- Detachable miter connector for 30-180° angles and all butt joints
- Minimal tool opening of just 6 mm
- Can be installed with any Lamello biscuit joiner
- Stackable for transport, despite pre-installed connectors
- High clamping force of 100 kg for glueing furniture at all angles
- Lateral tolerance for efficient installation using Classic X and Top 21 biscuit joiners
Applications
Clamex S can be used in the production of furniture, cabinets, displays or exhibit manufacturing.
The connector is a popular solution for open shelf units, large pieces of furniture and angled counters, while also being used as a general gluing aid. It is also frequently employed as an aesthetic, high-quality connection for premium products.
- Knock down connector for furniture, shelf units, kitchen manufacturing etc.
- Gluing aid for miters and unusual angles
- Connector for detachable elements in store fixtures and exhibit construction
- Powerful alternative to standard connecting fittings
- Rapid prototype construction before starting new product lines
- On-site adjustments and assembly
Specifications
Size: 66 × 29 × 8 mm
Cutter: Ø 100 x 8 x 22
Shell Material: Fiberglass reinforced plastic
Lever Material: Zinc die-cast
Installation Tolerance: Longitudinal ± 1 mm
Tensile Strength:
Particle board ~ 800 N ≈ 180 lbf.
Tensile Strength:
Beech ~ 1300 N ≈ 292 lbf.
Specifications
What is Lamello | Clamex S-18?
Lamello | Clamex S-18 is a knock-down connector screwed into an 8 mm groove and connected via a lever.
What groove cutter theme is listed?
An 8 mm groove cutter for Clamex S can be used with any Lamello biscuit joiner; cutter size O 100 x 8 x 22 is listed in specifications.
What minimum material thickness theme is listed?
Minimal installation depth of 14.7 mm is listed, usable in wood materials from 16 mm.
What angles and joint types are listed?
Detachable miter connector for 30-180 degree angles and all butt joints are listed.
What clamping force is listed?
High clamping force of 100 kg for glueing furniture at all angles is listed.
What size and materials are listed?
Size about 66 x 29 x 8 mm; shell fiberglass reinforced plastic; lever zinc die-cast; installation tolerance longitudinal about 1 mm.
What tensile strengths are listed?
Particle board about 800 N / 180 lbf; beech about 1300 N / 292 lbf.
How do I get pricing?
Contact Centex Automation for current price, freight, and lead time, or use live storefront pricing when shown.
What brand support applies?
Centex Automation - Built by People Who Know the Shop Floor - helps shops select Lamello connectors and accessories.
Is install training included?
Clamex S setup, training, or service may be available; do not assume they are included. Ask Centex Automation.
What applications are listed?
Furniture, cabinets, displays/exhibits, open shelf units, large furniture, angled counters, gluing aid, store fixtures, prototypes, and on-site assembly are listed.
What should I confirm before ordering?
Confirm Clamex S-18 vs P-System Clamex, that you have or need the 8 mm cutter (see 132108), and quantity for pairs.
Is the 6 mm tool opening mentioned?
Yes. Minimal tool opening of just 6 mm is listed.
Can parts stack for transport with connectors installed?
Yes. Stackable for transport despite pre-installed connectors is listed.
How do I contact Centex Automation?
Use the storefront contact path or your Centex Automation sales contact for selection help, price, and lead time.