CE 25 50

All Star CNC CE 25 50 In-Board Gasketing — Frequently Asked Questions

1. What is CE 25 50 In-Board Gasketing?

CE 25 50 is an in-board vacuum gasket designed for CNC router spoilboards and dedicated vacuum fixtures. It installs into routed vacuum channels to create a secure air-tight seal for improved hold-down strength.

2. What do the numbers “25 50” represent?

The first “25” indicates a 1/4″ (0.250″) thickness, and the second “50” indicates a 1/2″ (0.500″) width, making it suitable for 1/2″ routed vacuum channels.

3. When should I use a 1/2″ wide gasket?

A 1/2″ width is typically used for larger routed vacuum channels or CNC tables designed for heavier vacuum isolation requirements.

4. How does CE 25 50 differ from CE 06 series gasketing?

CE 25 50 features a thicker 1/4″ profile compared to the thinner 1/16″ height in CE 06 models, offering greater compression and sealing strength.

5. What CNC machines can use CE 25 50?

It is compatible with CNC routers and vacuum tables that utilize 1/2″ wide routed channels for vacuum grid systems.

6. What materials benefit from this gasket?

MDF, plywood, hardwood panels, plastics, aluminum composite materials, and other sheet goods benefit from improved vacuum hold and reduced part movement.

7. Is CE 25 50 adhesive-backed?

Yes. The gasket includes adhesive on one side for secure installation inside routed vacuum grooves.

8. Does the thicker profile improve vacuum sealing?

Yes. The 1/4″ thickness allows greater compression, which can enhance sealing performance when properly matched to the channel depth and vacuum system.

9. How long is each roll?

Standard rolls typically contain approximately 164 feet of gasket material.

10. Can this gasket be used in custom vacuum fixtures?

Yes. It is commonly used in dedicated CNC fixtures requiring strong, repeatable vacuum isolation.

11. Does it improve machining accuracy?

Yes. Enhanced vacuum hold reduces vibration and part shifting during CNC machining operations.

12. Can it reduce the need for mechanical clamps or tabs?

Yes. Proper vacuum isolation often reduces or eliminates the need for mechanical hold-down devices.

13. Is CE 25 50 suitable for nested-based CNC routers?

Yes. Nested-based CNC routers benefit significantly from strong vacuum sealing, especially when machining smaller parts.

14. How do I confirm this size is correct for my spoilboard?

Measure the width and depth of your routed vacuum channels. The gasket should fit securely without excessive compression or looseness.

15. Is this gasket reusable?

Once installed, it remains in place until wear or compression fatigue reduces its sealing effectiveness. Replacement is recommended when performance declines.

16. Are other sizes available?

Yes. All Star CNC offers multiple width and thickness combinations to match various vacuum table designs.

17. Does thicker gasket require higher vacuum pump capacity?

Thicker gasket profiles may require adequate vacuum pump capacity to achieve proper compression and sealing performance.

18. Is bulk purchasing available?

Yes. Case quantities are available for production shops with higher gasket usage.

19. Where can CE 25 50 be purchased?

CE 25 50 In-Board Gasketing is available for purchase online through Centex Automation at centexautomation.net.

20. Is product support available?

Centex Automation is an authorized online retail seller of All Star CNC products. We provide product selection guidance, ordering assistance, and customer support through our online store at centexautomation.net.