Products

The A215 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side. The first station has the option to be configured to ju...

The A217 Double-End Tenoner profiles and sands both edges of hardwood parts in one continuous pass. Depending on model configuration, each side of ...

The A2515 Double-End Tenoner automatically makes all necessary adjustments for each profile setup. All spindles are set up to rotate with or agains...

The A2515 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side that automatically position all necessary adjustments f...

The A2517 Double-End Tenoner is fully equipped to automatically position all necessary adjustments for each profile setup. All spindles are of the ...

The A26 Cope Shaper is designed to shape single or multiple parts in one pass. Each shaping station is equipped with a precision-balanced drive mot...

The A515 Single-End Tenoner can accommodate four shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific shapers t...

The A517 Single-End Tenoner can accommodate five or more shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific s...

The Voorwood A5615 Automatic Double-Side Cope & Stick Shaper will process stiles and rails without operator input. RAIL PROCESSING: Substrates ...

The Automatic Hopper Feed increases the production of the Voorwood line of profile laminators. 12′ infeed table with 8 rollers 34.50″ belt height ...

The HML-12 Profile Laminator applies hot melt adhesives to the back of the various paper, foil, or vinyl webbings, and wraps the webbing around all...

The HML-6 Profile Laminator applies hot melt adhesives to the back of the various paper, foil, or vinyl webbing, and wraps the webbing around all t...

The HML-8 Profile Laminator applies hot melt adhesives to the back of the various paper, foil, or vinyl webbings, and wraps the webbings around all...

The L115 Edge Foiler shape the profile, sand it smooth and apply the dry-transfer finish foil on MDF consecutively in one continuous process. Stock...

The L117 Edge Foiler shapes the profile, sands it smooth and applies the dry-transfer finish foil on MDF in a single continuous process. Stock is t...

The L217 Double-End Foiler profiles, sands, and applies dry-transfer finishing foil to both edges of MDF parts in one continuous pass. Designed for...

The L79 End Finisher is designed to precisely cut MDF mouldings to length, then sand both ends. Next, to complete the one-pass process, an applicat...

The LUR27 Converter Laminator (Film to Film Laminator) applies transfer-finishing foils to the surface of PVC. Hot-stamp foils have the look of rea...

The M15 Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45°, and 90° degrees. Parts can be up to 1.5” thick and up to 4” wi...

The P78 Plough Foiler cuts a single plough (bluff cut) to the desired profile in an MDF drawer front or similar component and then sands and applie...

The WL12 Profile Wrapper (L-12 Profile Laminator) is for paper, vinyl, and low-pressure laminates. This compact laminator produces high-quality mou...

The WL4 Profile Wrapper (L-4X Profile Laminator) is for applying paper, vinyl, and low-pressure laminates upon substrates. This compact laminator p...

CNC Round Grid Gasketing Medium Density .1875" x 100 Feet per Bag No Adhesive Available in 18 Bag Cases 15% Savings When Ordered By The Case

CNC Round Grid Gasketing Medium Density .3750" x 100 Feet per Bag No Adhesive Available in 18 Bag Cases 15% Savings When Ordered By The Case