Products

Northtech’s DTM700CNC is our single spindle CNC dovetailer with 27-1/2″ working width. This machine has servo controlled X-Y positioning that allow...

The NT-EM250 is our automatic 10″ working width feed through end matcher. The feed through design allows for simultaneously processing of both the ...

Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with that has ...

MACHINE HP: 10 HP DIRECT DRIVE (MOTOR): Motor to 7'' x 13'' Pulley VOLTAGE, FREQUENCY: 230/460 Volt 60Hz PHASE: 3 Phase AMP REQUIREMENT: 30/15 Amps...

Northtech offers one of the largest selection of heavy duty industrial grade edge sanders. The NT-ES1648D is our largest capacity edge sander with ...

Northtech edge sanders are built for the industrial use. The NT-ES636DE is our most compact edge sander with that has a 6″x36″ sanding area on both...

Northtech offers a large family of industrial grade edge sanders. The NT-ES948DE falls into the middle of the family of edge sanders with a 9″x48″ ...

Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with that has ...

MAIN MOTOR HP: 60 HP VOLTAGE, FREQUENCY: 230/460 Volt 60 PHASE: 3 Phase AMP REQUIREMENT: 100/50 Amps FEED HP: 5 HP FEED SYSTEM: (6) Top (2) Bottom ...

MAIN MOTOR HP: 20 HP VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: 25 / 50 Amps FEED HP: 2 HP FEED SYSTEM: 11-1/4'' x 216'...

MAIN MOTOR HP: 20 HP VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz AMP REQUIREMENT: 27 / 54 Amps FEED HP: 2 HP FEED SYSTEM: Conveyor Belt DRIVE SYSTEM: Mo...

MAIN MOTOR HP: 20 HP VOLTAGE, FREQUENCY: 230/460 Volt PHASE: 3 Phase AMP REQUIREMENT: 27 / 54 Amps FEED HP: 2 HP FEED SYSTEM: 11-1/4 Rubber Feed Ma...

The Northtech HBR250BS-2A is a (2) headed resaw. The top over bottom design not only reduces machine footprint when compared to a traditional multi...

The NT HBSS-240 is a heavy duty horizontal boring machine. The multiple boring head configuration is adjustable for varying hole layouts for custom...

The NT HBSS-280 is a heavy duty horizontal boring machine. The multiple boring head configuration is adjustable for varying hole layouts for custom...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: .1 Amps FEED SYSTEM: 53-1/2'' Air Cylinder DRIVE SYSTEM: PLC FEED SPEED RANG...

The NT-HRR3 is a unique horizontal resaw with a vertical trough feeding system that is used to size material by edging it. Most commonly used for f...

The Northtech NT HWG50-HD is a horizontal wood grinder with a tilted infeed. There is a hard polymer friction resistant slide with over 4″x25″openi...

MACHINE HP: 6 HP DIRECT DRIVE (MOTOR): Direct Drive Servo Motor VOLTAGE, FREQUENCY: 230/460 Volt 60HZ PHASE: 3 Phase AMP REQUIREMENT: 8 / 18 Amps A...

MACHINE HP: 6 HP DIRECT DRIVE (MOTOR): Direct Drive Servo Motor VOLTAGE, FREQUENCY: 230/460 Volt 60HZ PHASE: 3 Phase AMP REQUIREMENT: 8 / 18 Amps C...

The Northtech iGlue is the revolutionary new gluer that quickly and accurately applies glue to dovetail and similar joinery. You literally just sti...

The NT-J12 Jointer has a 12″ working width and long infeed and outfeed table for a smooth and flat surface making them ideal for gluing surface pre...

The NT-J16 Jointer has a 16″ working width, 10HP and over 88″ of infeed and outfeed table for a smooth and flat surface making them ideal for gluin...

The NT-J20 Jointer has a 20″ working width, 10HP and over 100″ infeed and outfeed table for a smooth and flat surface making them ideal for gluing ...